- Frame 2 Kinetix 5500 platform for one independently sized servo axis
- Integrated Motion over EtherNet/IP links the axis with a supported Logix controller
- Hardwired Safe Torque Off provides the documented drive safety interface
Allen-Bradley 2198-H015-ERS is integrated with a supported controller, motor, DSL feedback device, brake option, and approved 2090 cable.
Selection must distinguish its 230 V single-phase, 230 V three-phase, and 480 V three-phase operating points before motor or protective-device sizing.
Verify the load profile, controller and drive firmware, feedback and brake interfaces, branch protection, regeneration, grounding, enclosure cooling, and safety validation before commissioning.
Availability, condition, price, and shipping time for 2198-H015-ERS are confirmed during quotation.
Allen-Bradley 2198-H015-ERS Kinetix 5500 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- KTK-R-10 is documented for the 240 V single-phase input condition
- KTK-R-15 is documented for the 240 V and 480 V three-phase conditions
- Solid-state motor overload protection is integrated in the drive
- DSL feedback and motor-temperature data use the documented single motor cable
- Approved 2090 motor cables must match the selected motor and brake option
- Shield clamps and connector hardware must follow the installation instructions
- Controller and drive firmware levels must support the selected Logix motion configuration
- Axis configuration is completed within the documented Studio 5000 environment
- Installed firmware must be recorded before replacement or migration
- Single-axis Logix-integrated motion using a Frame 2 Kinetix 5500 drive
- 230 V single-phase or three-phase machines using the documented operating point
- 480 V three-phase machines using the documented 3.2 kW operating point