- Wider modular IAM power section combines a line-side converter with two inverter rail positions
- Compatible Kinetix 6200 or Kinetix 6500 control hardware is selected separately
- The IAM supplies a shared Bulletin 2094 DC rail for the engineered multi-axis configuration
2094-BC04-M03-M serves as the integrated power entry and first higher-current servo axis in a modular Bulletin 2094 assembly.
The separately installed control module establishes the motion network and feedback behavior, while the wider power section occupies the converter position and two inverter slots.
Plan the rail layout, safe handling, total DC demand, shunt duty, motor and feedback pairing, cable access, protective devices, grounding, firmware, and enclosure airflow before installation.
Availability, condition, price, and shipping time for 2094-BC04-M03-M are confirmed during quotation.
Allen-Bradley 2094-BC04-M03-M Kinetix 6200/6500 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The IAM combines the converter position with two inverter slots on a supported Bulletin 2094 power rail
- Compatible additional axis modules are installed to the right within the converter and rail limits
- The complete rail catalog number and slot arrangement must be verified before moving existing modules
- The open-type module must be installed in a suitable enclosure with the documented ambient limits
- Vertical orientation and specified top and bottom clearances are required for cooling airflow
- Total enclosure heat dissipation must include the IAM, control module, rail axes, shunt hardware, and adjacent equipment
- Feedback support is determined by the Kinetix 6200 or Kinetix 6500 control module fitted to the power section
- Motor and feedback pairings must follow the Rockwell Automation compatibility and sizing tables
- Connector kits, cable catalog numbers, shielding, and feedback power requirements must match the selected device
- Higher-capacity Bulletin 2094 multi-axis systems that need an integrated converter and one modular servo axis
- SERCOS motion systems assembled with a compatible Kinetix 6200 control module
- Integrated Motion over EtherNet/IP systems assembled with a compatible Kinetix 6500 control module