Features:
- Frame 1 Kinetix 5300 400 V-class servo drive
- 0.86 kW output at the documented 480 V three-phase condition
- 1.6 A rms continuous and 5.3 A rms peak output current
Allen-Bradley
2198-C4004-ERS accepts 342...528 V rms three-phase input and provides Integrated Motion over EtherNet/IP with standard hardwired Safe Torque Off (STO).
The Kinetix 5300 design guide documents motor curves for this drive with MPL-B1510V, MPL-B1520U, MPL-B1530U, and MPL-B210V motors.
Confirm the motor winding, torque-speed requirement, feedback and brake interfaces, controller configuration, cable set, axis duty, circuit protection, and STO wiring before selection or migration.
Availability, condition, price, and shipping time for 2198-C4004-ERS are confirmed during quotation.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Module and network status indicators are located below the four-character display
- Module status identifies operational, standby, recoverable major-fault, and unrecoverable major-fault states
- Network status identifies an established connection, connection timeout, or duplicate IP address
- Operational ambient temperature range is 0...50 °C (32...122 °F)
- Operational relative humidity range is 5...85% noncondensing
- Documented operational altitude is 1000 m (3281 ft)
- cULus listed to UL 61800-5-1 under file E59272
- TÜV-certified hardwired safety supports PL d, Category 3 and SIL CL2 when applied as documented
- Maximum audible noise complies with OSHA standard 3074 at less than 85 dBA
- Electronics assembly
- Packaging and converting
- Printing and web (CPW)