- 150 A rms continuous output for one Kinetix 5700 axis
- 263 A rms peak output at the documented 1.0- and 3.0-second durations
- 220 mm module with 164.0 A DC input and 2050 µF internal capacitance
Allen-Bradley
2198-S263-ERS3 is intended for one high-current Kinetix 5700 axis in a shared DC-bus installation; Series B hardware and the ERS3 integrated-safety configuration must be matched to the existing system.
For retrofit planning, verify the 220 mm shared-bus and control-power hardware, supported motor-feedback and cable combination, and required controller and firmware revision before ordering.
Complete commissioning checks should cover total connected bus capacitance, regenerative duty, cable routing and conductor sizing, enclosure thermal design, grounding, and validated safety functions.
Availability, condition, price, and shipping time for 2198-S263-ERS3 are confirmed during quotation.
Allen-Bradley 2198-S263-ERS3 Kinetix 5700 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The S263/S312 module group uses 220 mm shared-bus connector hardware
- The documented module dimensions are 220 × 478 × 252 mm
- The approximate catalog weight is 15.88 kg
- S263 and S312 inverters do not support 2090-CSxM1Dx single cables
- Use a Kinetix 2090 cable family documented for the chosen motor and feedback combination
- Verify conductor sizing, connector sets, and cable-bend space for the 220 mm module
- Studio 5000 Logix Designer version 32.00 or later is specified for S263/S312 modules
- The drive uses Integrated Motion over EtherNet/IP with a compatible Logix controller
- Series B firmware must be matched to the controller project and integrated-safety functions
- High-power single-axis duties requiring up to 90.0 kW at 480 V-class
- Shared DC-bus systems sized for the S263 current and capacitance contribution
- Engineered installations requiring the S263 motor-cable restrictions and 220 mm hardware