- V32 hardware uses the documented standard single-phase input arrangement
- Main AC and control-power backup use separate documented connections
- The PR2 configuration provides one higher-current motor-feedback channel than the PR0 option
2097-V32PR2-LM is the higher-current V32 Kinetix 350 configuration for one servo axis in a Logix motion system.
The drive combines mains conversion, motor feedback, digital I/O, network interfaces, and hardwired Safe Torque Off in one compact axis module.
Before commissioning, verify branch protection, control-power backup, controller profile, supported motor-feedback combination, connector kit, and enclosure clearances.
Availability, condition, price, and shipping time for 2097-V32PR2-LM are confirmed during quotation.
Allen-Bradley 2097-V32PR2-LM Kinetix 350 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- A compatible Logix controller commands the axis through Integrated Motion over EtherNet/IP
- CIP Motion and CIP Sync provide coordinated motion and network time synchronization
- Axis ownership, electronic keying, motion-group timing, and tuning must be validated
- The integrated input filter does not replace required branch-circuit protection
- Motor overload, grounding, shielding, and enclosure thermal design must follow the manual
- Safe Torque Off wiring is part of a separately assessed and validated machine safety system
- Rockwell Automation identifies 2198-C1007-ERS as the engineering replacement
- Motor feedback, cable catalog numbers, connectors, dimensions, and power wiring require comparison
- Controller programming, network setup, tuning, safety behavior, and commissioning tests must be updated
- Higher-current single-axis positioning in Logix-controlled machinery
- Machine axes coordinated with other controller-based motion through CIP Sync
- Servo axes requiring hardwired Safe Torque Off in a validated safety circuit