- The V33 construction supports documented 120 V and 240 V supply arrangements without the V32 integrated-filter feature
- One EtherNet/IP motion axis is configured and diagnosed from a compatible Logix controller
- The drive provides dedicated connections for motor power, motor feedback, shunt, network, and Safe Torque Off
2097-V33PR1-LM is selected for a lower-current Kinetix 350 axis where the supply arrangement, motor-feedback pair, and controller project are confirmed together.
Replacement planning must preserve the IP address, axis properties, firmware levels, electronic keying, motor catalog number, feedback cable, and safety-circuit details.
The published engineering replacement is not a drop-in substitution; panel space, wiring, feedback, safety, and Logix programming require migration review.
Availability, condition, price, and shipping time for 2097-V33PR1-LM are confirmed during quotation.
Allen-Bradley 2097-V33PR1-LM Kinetix 350 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Rockwell Automation lists the 2097-R4 passive shunt for this drive size
- Shunt selection is based on motor inertia, load inertia, speed, deceleration time, and repeated duty
- The shunt resistor is mounted and wired with the clearances and conductor practices in the Kinetix 350 manual
- The selected feedback cable must match both the motor connector and the drive feedback interface
- Compatible flying-lead feedback cables can use the 2090-K2CK-D15M low-profile connector kit
- The motor and feedback catalog numbers are retained in the service record before any drive exchange
- CIP Motion and CIP Sync operate through the embedded EtherNet/IP interface
- The IP-addressing method, subnet, controller path, and axis association are recorded before replacement
- Controller firmware, drive firmware, Add-On Profile, and electronic keying are verified as one configuration
- Lower-power single-axis machine sections using Logix-integrated EtherNet/IP motion
- Indexing axes that require separate verification of line filtering and regenerative duty
- Low-axis process skids using Logix-integrated EtherNet/IP motion