- Single-axis Kinetix 350 architecture for Logix-based EtherNet/IP motion control
- 120 V and 240 V supply configurations supported under the documented operating conditions
- Safe Torque Off interface for integration into a separately validated machine-safety circuit
2097-V33PR5-LM provides one coordinated motion axis in a Kinetix 350 system and must be matched to a compatible Logix controller, motor, and feedback device.
Selection begins with the actual supply voltage and phase because the available operating point changes between the documented 120 V and 240 V conditions.
Confirm firmware, network configuration, cables, protection, regeneration, cooling, grounding, and the complete safety design before commissioning or migration.
Availability, condition, price, and shipping time for 2097-V33PR5-LM are confirmed during quotation.
Allen-Bradley 2097-V33PR5-LM Kinetix 350 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Commission the drive within a compatible Logix EtherNet/IP motion project
- Match the configured drive firmware and electronic keying to the installed hardware
- Validate motor polarity, feedback direction, scaling, and Safe Torque Off operation before production use
- Use the documented 390 V DC shunt turn-on and 375 V DC turn-off thresholds in system review
- Evaluate motor and load inertia, maximum speed, deceleration time, and repeated duty cycle
- Verify shunt and enclosure thermal requirements with the official Kinetix sizing resources
- Rockwell Automation lists 2198-C1015-ERS as the engineering replacement
- The replacement uses a different drive platform and requires controller, motor, cable, and panel review
- Preserve the original project, parameter, firmware, and wiring records before removing the installed drive
- Single-axis indexing and coordinated motion in compatible Logix-controlled machinery
- 120 V or 240 V machine sections selected within the published Kinetix 350 operating conditions
- Applications requiring the documented Safe Torque Off interface and EtherNet/IP motion control