Features:
- Frame F Kinetix 5100 400 V-class catalog configuration
- Dedicated motor and auxiliary feedback connections
- Separate 24 V DC control-power input
2198-E4075-ERS is the 7.50 kW catalog configuration for 342...528 V rms three-phase input.
The drive supports standalone pulse, analog, and indexed position commands together with EtherNet/IP device communication.
Verify the controller, motor and feedback, command signals, connector kits, protection, cable set, grounding, enclosure conditions, regeneration, and safety circuit before installation.
Current availability, condition, price, and shipping time for 2198-E4075-ERS are checked during quotation.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Maximum published power loss is 467 W at 380 V input
- Maximum published power loss is 494 W at 480 V input
- Power-loss data is used to size enclosure ventilation
- Internal shunt capability is evaluated from the actual regenerative duty
- Bulletin 2198 external shunt modules are listed for supported configurations
- Vertical loads and rapid deceleration require regeneration review
- A separate motor-brake cable is required for drives rated 5.5 kW and above
- Protective-earth grounding and shield bonding follow publication 2198-UM004
- AC line filters are applied where specified for the required compliance condition
- Higher-current digital-I/O indexed motion sequences
- Pulse-command single-axis position control
- Analog-command speed or torque control