Features:
- 5.5-inch color PanelView Plus 600 display.
- Keypad operator input with programmed function keys.
- EtherNet/IP and RS-232 communication on an AC-powered terminal.
The color screen and physical keypad support applications where tactile commands remain part of normal machine operation.
The 20 communication code gives the project both network and serial connection options.
The A power suffix must be matched with the installed AC branch before any replacement is energized.
Apter Power supports document review, exact-model quotation and procurement for the Allen-Bradley 2711P-K6C20A PanelView Plus 600 Keypad Color Terminal.
Allen-Bradley 2711P-K6C20A PanelView Plus 600 Keypad Color Terminal Manuals and Support Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Physical function keys provide tactile command entry.
- The runtime defines navigation, data-entry and machine-key assignments.
- The color display presents process graphics while the keypad remains the primary input.
- Commissioning should test each programmed key against the approved sequence.
- EtherNet/IP supports the configured network route to the controller.
- RS-232 is available when the project or peripheral uses a serial link.
- IP settings, controller shortcuts and serial parameters must come from the installed record.
- Communication must be proven with the loaded runtime, not from link lights alone.
- The A suffix identifies the AC-input construction.
- Protective earth and connector assignment must match the removed terminal.
- The PanelView Plus 600 cutout and rear clearance must be retained.
- Power, keypad response and controller data should be validated before handover.
- Color keypad HMI stations on legacy PanelView Plus 600 machines.
- AC-powered operator panels connected through EtherNet/IP.
- Installed equipment that retains an RS-232 device or controller path.