- Measures two Pt100 or Pt1000 resistance-temperature channels
- Supports direct resistance measurement with 16-bit sigma-delta conversion
- Provides configurable filtering and explicit open-circuit fault values
X20AT2222 is a B&R temperature input module designed for X20 System I/O stations.
The module converts two resistance-temperature channels into controller values while allowing sensor type selection per channel and a module-level choice of 2- or 3-wire connection.
Before installation or replacement, verify the complete material number, Pt100 or Pt1000 selection, the module-level 2- or 3-wire mode, lead resistance, filter time, conversion timing, scaling, X20TB06 or X20TB12, X20BM11 or X20BM15, and fault-value handling.
Availability, condition, price, and shipping time for X20AT2222 are confirmed during quotation.
B&R X20AT2222 Temperature Input Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Pt100 or Pt1000 sensor type is configured independently for each channel
- The choice between 2-wire and 3-wire connection is configured for the complete module
- Internal linearization follows the documented EN 60751 characteristic
- An open temperature input is reported with the documented 0x7FFF value
- An open resistance-measurement input is reported with the documented 0xFFFF value
- Range and general-fault values must be handled explicitly in controller logic
- Filter time is configurable from 1 to 66.7 milliseconds
- One enabled channel converts faster than two channels with the 50 hertz filter
- Required response time and noise rejection should be balanced during configuration
- Two-channel Pt100 temperature acquisition in X20 stations
- Pt1000 process-temperature measurement in distributed I/O
- Direct resistance measurement in machine and process-control systems