- Uses a 1.0 GHz Intel Atom processor with an additional I/O processor
- Provides 256 MB DDR2 SDRAM, Gigabit Ethernet, POWERLINK, USB, RS232, and X2X Link
- Runs fanless and supports a 200 microsecond shortest task class cycle
X20CP1585 is a B&R X20 System PLC CPU for control applications with integrated industrial networking.
It combines a 1.0 GHz Intel Atom processor, 256 MB DDR2 SDRAM, Gigabit Ethernet, POWERLINK, USB, RS232, X2X Link, a modular interface slot, and CompactFlash application storage.
Before installation or replacement, verify the complete material number, Automation Runtime and project compatibility, CompactFlash image, interface module, network settings, 24 V DC supply, X20 power segmentation, mounting orientation, and backups.
Availability, condition, price, and shipping time for X20CP1585 are confirmed during quotation.
B&R X20CP1585 Programmable Logic Controller CPU Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The Intel Atom E640T processor operates at 1.0 gigahertz with an additional I/O processor
- Working memory is 256 megabytes of DDR2 SDRAM with 1 megabyte of SRAM
- The shortest documented task class cycle is 200 microseconds
- One Gigabit Ethernet RJ45 interface supports 10, 100, or 1000 megabits per second
- POWERLINK can operate as a managing node or controlled node and supports poll-response chaining
- Two USB Type A ports, RS232, X2X Link master, and one modular interface slot are provided
- CPU and X2X input uses 24 volts DC with a minus 15 to plus 20 percent tolerance
- Power consumption is 8.8 watts excluding an interface module and USB loads
- Fanless operation is specified from -25 to 60 degrees Celsius in horizontal mounting
- Industrial control equipment using the X20 System controller platform
- Process control equipment using integrated Ethernet, POWERLINK, and X2X Link
- Class I Division 2 hazardous-location control systems within the documented certification conditions