Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com

X20CM4810

/ 4.9
1001 reviews | Need a Specific Revision?
B&R X20CM4810 is a four-channel IEPE vibration acquisition and analysis module for machine condition monitoring for the X20 System.
In Stock
Ships by Wednesday, October 28
Fast Shipping Available
Get a quick price for X20CM4810
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for X20CM4810

  • Manufacturer:
    B&R
  • Part Number:
    X20CM4810
  • Product Family:
    B&R X20 System
  • Product Type:
    Condition Monitoring Module
  • Stock:
    1
  • Vibration inputs:
    4
  • Sensor type:
    IEPE acceleration sensor
  • Digital converter resolution:
    24-bit
  • Sampling frequency:
    51.5625 kHz
  • Permissible input signal:
    ±10 VAC
  • Input high-pass cutoff:
    34 mHz
  • Input low-pass cutoff:
    19.75 kHz
  • Configurable downsampling:
    200 Hz, 500 Hz, 1 kHz, 2 kHz, 5 kHz, or 10 kHz
  • IEPE sensor supply:
    5 mA constant current, 4.9 to 5.5 mA, switchable per channel
  • Open-circuit detection:
    Per channel
  • Nominal voltage:
    24 VDC ±20%
  • Required bus module:
    X20BM31, ordered separately
  • Required terminal block:
    X20TB12, ordered separately
  • Module pitch:
    25 mm +0.2 mm
  • Degree of protection:
    IP20
  • Operating temperature:
    -25 to 50 °C horizontal; -25 to 45 °C vertical
  • Tariff Code:
    8538900000
  • Country of origin:
    Germany
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Sensor Setup Acquisition Analysis Application
  • Acquires four IEPE acceleration channels for condition monitoring
  • Samples at 51.5625 kilohertz with 24-bit sigma-delta conversion
  • Provides per-channel sensor supply, open-circuit detection, downsampling, and spectral analysis

X20CM4810 is a B&R condition monitoring module designed for the X20 System.

The module brings high-resolution vibration data and calculated condition values into an X20 station for analysis of rotating-machine behavior and developing mechanical faults.

Before installation or replacement, verify the complete material number, IEPE sensor compatibility and sensitivity, sensor mounting, cable and shield routing, sampling and downsampling settings, analysis parameters, X20BM31, X20TB12, and the saved condition-monitoring configuration.

Availability, condition, price, and shipping time for X20CM4810 are confirmed during quotation.

B&R X20CM4810 Condition Monitoring Module Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Each channel provides a switchable IEPE constant-current sensor supply
  • Sensor sensitivity and mounting direction must match the configured measurement task
  • B&R accelerometers and drag-chain-capable sensor cables are available as optional accessories
  • All four vibration inputs use the documented 51.5625 kilohertz sampling frequency
  • Downsampling can be configured from 200 hertz through 10 kilohertz
  • The analog path spans the documented 34 millihertz to 19.75 kilohertz cutoff range
  • The module supports vibration measurement and analysis for condition-monitoring tasks
  • Configurable spectral resolution supports analysis at different downsampling rates
  • Calculated parameters and characteristic values are available to the Automation Studio project
  • Rotating-machine imbalance monitoring
  • Periodic-impact detection in mechanical equipment
  • Bearing-damage analysis using IEPE acceleration sensors
Description
X20CM4810 is a B&R condition monitoring module for the X20 System automation platform.

It powers and acquires four IEPE acceleration sensors with 24-bit sigma-delta conversion at 51.5625 kHz and performs configurable downsampling and spectral processing for condition-monitoring tasks.

Before installation or replacement, confirm the complete material number, IEPE sensor compatibility and sensitivity, sensor mounting, cable and shield routing, sampling and downsampling settings, analysis parameters, X20BM31, X20TB12, and the saved condition-monitoring configuration.
Alternative Names
X20CM4810 X20 CM 4810 X20-CM4810 B&R X20CM4810 BR X20CM4810 B&R X20 CM4810
Technical notes
X20CM4810 is intended for four IEPE acceleration channels; verify sensor sensitivity and mounting, cable integrity, switchable sensor supply, sampling and analysis settings, X20BM31, X20TB12, and saved condition-monitoring parameters before replacement.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Which sensors are suitable for B&R X20CM4810?
Use compatible IEPE acceleration sensors and configure their sensitivity correctly; verify connector, cable, mounting direction, measurement range, and constant-current requirements before commissioning.
What should be checked when B&R X20CM4810 reports an open sensor channel?
Inspect the accelerometer, M12 sensor cable, terminal connection, shield, conductor continuity, and per-channel sensor-supply setting before replacing the module.
How should downsampling be selected on B&R X20CM4810?
Choose a rate that preserves the highest fault frequency of interest while controlling data volume, then validate aliasing protection and analysis bandwidth on the actual machine.
Why can vibration trends change after replacing B&R X20CM4810?
Different sensor sensitivity, mounting torque, orientation, cable condition, filters, downsampling, or analysis parameters can change the measured trend even when the module is healthy.
Can B&R X20CM4810 use a standard single-width bus module?
No. B&R specifies the X20BM31 bus module for this double-width electronic module together with an X20TB12 terminal block.
How should noise and grounding be handled with B&R X20CM4810?
Keep sensor cables away from power wiring, preserve the documented shield and grounding arrangement, avoid ground loops, and verify that the sensor case and mounting surface suit the measurement plan.
What should be backed up before replacing B&R X20CM4810?
Save sensor sensitivity, supply state, sampling and downsampling settings, filters, spectra and characteristic-value configuration, alarm thresholds, channel mapping, and baseline trend data.