- Uses Intel Atom E3940, 1.6 GHz, 4-core, with integrated I/O processor
- Provides 2 GB LPDDR4 SDRAM, 1 x 10/100/1000BASE-T, shielded RJ45, and POWERLINK V2, 100 Mbit/s, managing or controlled node, PRC support
- Runs fanless with a shortest task class cycle of 100 microseconds
X20CP3687X is a B&R X20 System programmable logic controller CPU for industrial automation control.
It combines Intel Atom E3940, 1.6 GHz, 4-core, with integrated I/O processor, 2 GB LPDDR4 SDRAM, integrated Ethernet and POWERLINK, USB, RS232, X2X Link / X2X+ master, and 3 modular interface slots; 1 CompactFlash slot.
Before installation or replacement, verify the complete material number, Automation Runtime and project compatibility, CompactFlash image, interface modules, network roles, 24 VDC supply, X20 power segmentation, mounting orientation, and backups.
Availability, condition, price, and shipping time for X20CP3687X are confirmed during quotation.
B&R X20CP3687X Programmable Logic Controller CPU Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The processor configuration is Intel Atom E3940, 1.6 GHz, 4-core, with integrated I/O processor
- Working memory is 2 GB LPDDR4 SDRAM, with 1 MB SRAM
- The shortest task class cycle is 100 microseconds and the typical instruction cycle is 0.0010 microseconds
- 1 x 10/100/1000BASE-T, shielded RJ45
- POWERLINK V2, 100 Mbit/s, managing or controlled node, PRC support
- 2 x USB 1.1/2.0 Type A, 0.5 A maximum per port; RS232 via X20TB12, 115.2 kbit/s maximum, 900 m maximum; X2X Link / X2X+ master
- CPU and X2X supply input is 24 VDC -20%/+25%, 1.5 A maximum at 24 VDC
- Power consumption is 8 W without interface module and USB loads
- Fanless IP20 operation is specified at -25 to 60 °C horizontal; -25 to 50 °C vertical
- X20 controller applications with the highest documented performance requirements
- Redundant control-system applications supported by the controller
- Multicore control applications using POWERLINK V2 and X2X Link or X2X+