- Couples X67 and X2X Link I/O to POWERLINK
- Provides eight local channels configurable as inputs or outputs
- Supports synchronous fieldbus and X2X operation from a 200 microsecond cycle
X67BC8331 is a B&R powerlink bus controller with integrated digital i/o designed for the X67 System.
The controller couples distributed X67 and X2X Link I/O to POWERLINK while providing local field I/O and a 3 W X2X power output.
Before installation or replacement, verify the complete material number, the POWERLINK node and cycle configuration, D-coded M12 Ethernet wiring, channel directions, 8 A total output current, X2X power budget, firmware, Automation Studio project and sealed connector condition.
Availability, condition, price, and shipping time for X67BC8331 are confirmed during quotation.
B&R X67BC8331 POWERLINK Bus Controller with Integrated Digital I/O Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- POWERLINK uses a D-coded M12 100BASE-TX connection
- Dynamic node allocation is supported
- POWERLINK and X2X cycles can be synchronized using the documented prescaler
- Eight M8 channels are configured individually as inputs or outputs
- Input filters are software-configurable from 0 to 25 ms
- Output monitoring reports channel faults after the documented diagnostic delay
- The integrated X2X connection supports up to 250 additional modules
- The controller provides 3 W of X2X Link power
- The complete expansion power and cycle-time budget must be calculated
- POWERLINK-connected distributed machine I/O stations
- IP67 local sensor and actuator control with integrated configurable channels
- Expansion of field-mounted X67 stations through additional X2X Link I/O