- Generates four ±10 V analog command signals
- Updates all outputs in 400 microseconds
- Provides IP67 setpoint delivery close to drives and actuators
X67AO1223 is a B&R 4-channel ±10 v analog output module designed for the X67 System.
The module sends distributed analog command and setpoint signals to drives, valves and other voltage-controlled devices.
Before installation or replacement, verify the complete material number, the ±10 V receiving device, load resistance, reference and shielding, M12 A-coded output pinout, power-up and error-state behavior, project scaling, cable route and IP67 sealing.
Availability, condition, price, and shipping time for X67AO1223 are confirmed during quotation.
B&R X67AO1223 4-channel ±10 V Analog Output Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Each receiving input should be at least 1 kilohm
- Output current is limited to ±10 milliamperes per channel
- Reference and grounding must prevent unwanted common-current paths
- The controller project defines engineering scaling and limits
- Power-up, communication-loss and disabled-output behavior must be tested
- Approximately 1 millisecond is required for a full-range settling step
- Analog cables should be separated from high-current switching conductors
- Shield termination should follow the machine EMC plan
- Compatible sealed connectors and caps maintain IP67 protection
- Distributed ±10 V speed or torque commands for drives
- Voltage setpoints for proportional valves and actuators
- IP67 analog reference generation near machine mechanisms