Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power can supply 200150-09-CN after its complete configuration, compatibility and delivery requirements are confirmed.

200150-09-CN

/ 4.9
1001 reviews | Need a Specific Revision?
Bently Nevada 200150-09-CN is a trendmaster pro accelerometer configured for 100 mv/g case-mounted accelerometer for trendmaster pro systems.
In Stock
Ships by Friday, October 30
Fast Shipping Available
Get a quick price for 200150-09-CN
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 200150-09-CN

  • Manufacturer:
    Bently Nevada
  • Part Number:
    200150-09-CN
  • Product Family:
    200150,200155and200157 Accelerometers
  • Product Type:
    Trendmaster Pro Accelerometer
  • Stock:
    1
  • Mounting option:
    09, 3/8-24 to 3/4 NPT stud with 1.25 in hex
  • Country approval:
    CN
  • Sensitivity:
    100 mV/g nominal
  • Measurement range:
    +/-25 g peak
  • Frequency response:
    10 Hz to 1 kHz
  • Excitation supply:
    4.7 to 5.5 V DC
  • Operating temperature:
    -40 to +105 degrees C
  • Electrical isolation:
    600 V rms
  • Tariff Code:
    9031809090
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Ordering Code Signal Details System Matching Installation Check

Product overview:

  • 100 mV/g case-mounted accelerometer for Trendmaster Pro systems
  • 3/8-24 to 3/4 NPT mounting adapter with 1.25 in hex
  • CN country approval option
200150-09-CN is a case-mounted piezoelectric accelerometer for wide-frequency machinery vibration measurement in compatible Trendmaster Pro systems. The sensor provides a nominal 100 mV/g output across a +/-25 g peak measurement range.

Mounting option 09 supplies a 3/8-24 to 3/4 NPT adapter with a 1.25 in hex, while CN identifies the country approval option. The transducer requires 4.7 to 5.5 V DC excitation from the supported interface.

Confirm mounting geometry, installation torque, cable and Trendmaster interface before use. Verify bias, signal polarity, channel scaling and approval documentation after commissioning.
Verified resources for Bently Nevada 200150-09-CN:

Configured ordering fields:

  • 200150: Trendmaster Pro accelerometer
  • 09: 3/8-24 to 3/4 NPT 1.25 in hex stud
  • CN: country approval option
Use the complete 200150-09-CN reference when checking the nameplate, certificate or replacement request.

Signal details:

  • 100 mV/g nominal sensitivity
  • +/-25 g peak measurement range
  • 10 Hz to 1 kHz frequency response
These details apply to the complete 200150-09-CN configuration and should be verified against the supplied unit.

Compatibility and matching:

  • Use a compatible 200151 interface cable
  • Provide 4.7 to 5.5 V DC excitation
  • Match the Trendmaster monitoring interface and scaling
Do not substitute 200150-09-CN until the mechanical, electrical and approval requirements have been matched.

Installation checks:

  • Prepare a rigid mounting point
  • Apply the correct adapter and torque
  • Verify bias, polarity and vibration response
Record mechanical, wiring and functional verification after installing 200150-09-CN.
Description
Bently Nevada 200150-09-CN Trendmaster Pro Accelerometer is a case-mounted piezoelectric accelerometer for wide-frequency machinery vibration measurement in compatible Trendmaster Pro systems. The sensor provides a nominal 100 mV/g output across a +/-25 g peak measurement range.

Mounting option 09 supplies a 3/8-24 to 3/4 NPT adapter with a 1.25 in hex, while CN identifies the country approval option. The transducer requires 4.7 to 5.5 V DC excitation from the supported interface.

Confirm mounting geometry, installation torque, cable and Trendmaster interface before use. Verify bias, signal polarity, channel scaling and approval documentation after commissioning.
Alternative Names
200150-09-CN 200150 09 CN 20015009CN Bently Nevada 200150-09-CN Baker Hughes 200150-09-CN 200150-09-CN Trendmaster Pro Accelerometer Bently Nevada 200150 09 CN Bently Nevada 200150-09-CN Trendmaster Pro Accelerometer
Technical notes
200150-09-CN is a 100 mV/g Trendmaster Pro accelerometer with a 3/8-24 to 3/4 NPT mounting adapter and CN country approval option.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What is the primary function for 200150-09-CN?
It converts machine casing acceleration into a 100 mV/g electrical signal for a compatible Trendmaster Pro monitoring system.
Which configuration is supplied for 200150-09-CN?
The supplied code includes mounting option 09 and the CN country approval option.
How is it connected or matched for 200150-09-CN?
Use the correct 200151 cable and a supported Trendmaster interface providing 4.7 to 5.5 V DC excitation.
Where is it normally applied for 200150-09-CN?
It is used for bearing-housing and machinery casing vibration monitoring over a 10 Hz to 1 kHz band.
What must be checked before replacement for 200150-09-CN?
Match sensitivity, mounting adapter, cable, excitation, isolation, approval and channel configuration.
Which technical document applies for 200150-09-CN?
The Apter-hosted 20015x datasheet in the Manuals tab documents sensor and cable data.
What should be verified during installation for 200150-09-CN?
Verify mounting surface, adapter torque, cable routing, excitation voltage, bias and signal response.
What is needed for a quotation for 200150-09-CN?
Provide the complete code, mounting details, interface hardware, approval need, quantity and destination.