Features:
- Non-armored 3/8-24 UNF probe case with a 3.4 in overall case length
- 2.0 m standard cable terminated by a miniature coaxial ClickLoc connector
- Option 05 multiple approvals covering CSA, ATEX, and IECEx
The order code 146054-34-20-02-05 selects the 146054 ceramic-capped design with a 3.4 in case and no armor.
Its alumina ceramic cap isolates the sensing tip from aggressive chemical exposure while the 304 stainless-steel case provides the documented mechanical construction.
The 2.0 m electrical length, ClickLoc connection, mounting thread, sealing arrangement, and hazardous-area approval requirements should be verified as one complete 3300 transducer-system selection.
Quotation, official documentation, and system-matching support for the Bently Nevada 146054-34-20-02-05 3300 Ceramic-Capped Proximity Probe are available from Apter Power.
Bently Nevada 146054-34-20-02-05 3300 Ceramic-Capped Proximity Probe Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 146054-34-20-02-05 3300 Ceramic-Capped Proximity Probe Specs
General
- ManufacturerBently Nevada
- Model146054-34-20-02-05
- ConditionNew Original ready stock
- Product Family3300 Ceramic Capped Probe
146054 Ordering Configuration
- 34: Specifies a 3.4 in (86.4 mm) overall case length.
- 20: Specifies a 2.0 m (6.6 ft) total probe length.
- 02: Selects a miniature coaxial ClickLoc connector with standard cable and no connector protector.
- 05: Selects the documented CSA, ATEX, and IECEx multiple-approval configuration.
Ceramic Probe Construction
- Tip material: The probe tip uses an alumina ceramic cap for corrosive environments.
- Case material: The probe body is constructed from 304 stainless steel.
- Armor option: Part number 146054 identifies the non-armored probe construction.
- Mounting thread: The probe case uses a 3/8-24 UNF thread.
3300 Installation Checks
- Electrical length: Match the documented 2.0 m probe length with the selected 3300 transducer-system arrangement.
- Connector interface: Confirm the miniature ClickLoc connection mates with the intended extension cable or system component.
- Process exposure: Verify that the ceramic cap, stainless-steel case, sealing, and mounting are suitable for the chemical environment.
- Hazardous area: Apply the CSA, ATEX, and IECEx requirements associated with ordering option 05.