Features:
- 3/8-24 UNF forward-mount ceramic capped probe
- 3.6-inch case with 0.5-meter total length
- Protected ClickLoc connection with option 05 approvals
This order code selects the 146054 unarmored construction and a 3.6-inch case. The 0.5-meter length suits compact installations where the complete electrical-length plan has been established.
The alumina ceramic tip withstands demanding process temperatures while the AISI 304 stainless-steel case provides the threaded mounting body. Standard 75-ohm FEP-insulated coaxial cable carries the proximity signal.
Confirm connector-protector clearance, extension-cable length, the compatible Proximitor Sensor, target material, and the applicable hazardous-area drawing before installation.
Availability for this probe configuration is subject to Apter Power inventory and sourcing confirmation.
Bently Nevada 146054-36-05-01-05 3300 Ceramic Capped Proximity Probe Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 146054-36-05-01-05 3300 Ceramic Capped Proximity Probe Specs
General
- ManufacturerBently Nevada
- Model146054-36-05-01-05
- ConditionNew Original ready stock
- Product Family3300 Ceramic Capped Probe
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Configuration Logic
- Case length: Option 36 defines a 3.6-inch overall probe case.
- Total length: Option 05 selects a 0.5-meter probe assembly.
- Connector: Option 01 supplies ClickLoc with a connector protector.
- Approvals: The final 05 selects the multiple-approval configuration.
Construction Details
- Sensing tip: Alumina ceramic forms the exposed capped tip.
- Case: AISI 304 stainless steel forms the probe body.
- Cable insulation: The standard coaxial lead uses FEP insulation.
- Impedance: The documented standard cable is 75 ohms.
Application Checks
- Electrical length: Match the probe and extension cable to the required system length.
- Signal conditioner: Use the compatible Bently Nevada Proximitor Sensor.
- Mounting: Provide a correct 3/8-24 UNF threaded location and case clearance.
- Approval use: Follow the temperature schedule and applicable installation drawing.