Features:
- Alumina ceramic tip with AISI 304 stainless-steel case
- 1.2 in 3/8-24 UNF forward-mount case and 0.5 m total length
- ClickLoc connector protector, no armor, and CSA/ATEX/IECEx approvals
The probe is designed for machinery monitoring in aggressive chemical or high-pressure environments and is compatible with the 3300 Proximitor sensor and extension cable.
Its front ceramic-to-metal interface is helium leak tested. The rear of this 146054 configuration is not sealed and must not be exposed to destructive media.
Gap the probe electrically, avoid direct target contact, and verify the monitor configuration before use.
Bently Nevada 146054-12-05-01-05 Manuals, Datasheets and Product Links
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
Bently Nevada 146054-12-05-01-05 Ceramic Capped Proximity Probe Specs
General
- Manufacturer Baker Hughes / Bently Nevada
- Model 146054-12-05-01-05
- Condition New
- Product Family 3300 Ceramic Capped Probe, 146054 Forward-Mount Probe
- Alumina ceramic sensing tip
- AISI 304 stainless-steel probe case
- 3/8-24 UNF forward-mount thread
- The front ceramic-to-metal interface is helium leak tested
- 1.52 mm (60 mils) linear range
- Recommended gap setting: 1.0 mm (40 mils)
- 7.87 V/mm (200 mV/mil) incremental scale factor for standard 5 m or 9 m system
- Rated to seal 34 bar (500 psi) nitrogen
- Maximum 3/8-24 thread engagement: 0.563 in
- Minimum cable bend radius: 25.4 mm (1.0 in)
- Gap electrically and avoid contact with the target surface
- Do not expose the unsealed rear of the probe to destructive media