Features:
- 8 Mm Eddy Current Probe Provides Precise Non-Contact Shaft Vibration And Position Measurement.
- Stainless Steel Case And PPS Tip Ensure High Durability And Resistance To Extreme Temperatures.
- ClickLoc Connector And FluidLoc Cable Support Reliable Signal Transmission Up To 5 Meters.
The Bently Nevada 330103-00-16-50-12-RU 3300 XL 8 mm Probe is designed for accurate monitoring of rotating machinery, delivering both static and dynamic measurement capabilities. Its miniature probe and robust construction make it suitable for installations in compact or constrained spaces.
Engineered for demanding industrial environments, the probe operates across a wide temperature range from -52°C to +177°C and maintains consistent performance with a nominal DC resistance of 8.73 ± 0.50 Ω. The stainless steel case combined with a polyphenylene sulfide (PPS) tip provides excellent wear resistance and stability over long-term operation.
Integrated with the 3300 XL system, the probe works seamlessly with extension cables and Proximitor sensors to generate vibration, position, and Keyphasor signals. Its modular design simplifies installation, maintenance, and continuous monitoring, supporting reliable operation of turbines, compressors, and other critical rotating equipment.
The 330103-00-16-50-12-RU Bently Nevada 3300 XL 8 mm Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330103-00-16-50-12-RU 3300 XL 8 mm Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330103-00-16-50-12-RU 3300 XL 8 mm Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330103-00-16-50-12-RU
- Condition New Original ready stock
- Product Family 330103-00-16-100-12-RU,330103-00-16-90-12-RU,330103-00-16-80-12-RU
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Physical Calibration Update: Regularly check the gap voltage at the probe tip to ensure it is at the midpoint of the linear range (typically -9V to -11V DC).
- System Upgrade Compatibility: Although the probe is a 3300 series, it is fully compatible with the newer 3500 series and Orbit 60 series monitoring systems (requires a 3300 XL preamplifier).
- Connector Replacement: If the ClickLoc connector is damaged, it can be replaced in the field using the 3300 XL connector repair kit without replacing the entire 5-meter cable.
- Environmental Protection Update: For models with RU (Russian certification), regularly check the integrity of the FluidLoc (12) liquid-resistant cable to ensure that the leak-proof standard continues to meet certification requirements.
- Range Configuration: In the monitoring software (e.g., System 1), it needs to be configured to the standard range of the 8mm probe (200 mV/mil or 7.87 V/mm).
- Target Material Programming: Calibration is performed by default for 4140 steel. If the target alloy is another alloy, the "Material Compensation Factor" needs to be set in the preamplifier or software.
- Zero Point Setting: Manually enter the "Zero Position" offset in the monitoring system by mechanically adjusting the probe's installation depth.
- Directional Programming: Define in the software whether the probe is installed horizontally or vertically to accurately synthesize the shaft center trajectory.
- Radial Vibration Monitoring: Installed at the sliding bearings of steam turbines and centrifugal compressors to monitor the real-time vibration displacement of the journal.
- Axial Displacement Protection: Installed on the rotor end face to monitor the wear of the thrust bearing and prevent axial collision between the rotor and stator.
- High-permeability risk environments: Utilizing its FluidLoc (12) properties, it is applied to units where turbine oil, synthetic oil, or coolant pressure permeation exists.
- Keyphasor measurement: Installed at the keyway of the shaft, it provides a reference for speed signals and vibration phases.