Features:
- High-Precision Eddy Current Measurement – Ensures accurate static and dynamic position readings.
- Reverse Mount Configuration – Supports installation in restricted or compact spaces.
- Robust Construction and Compatibility – PPS probe tip and stainless-steel case; fully interchangeable with 3300 series components.
The Bently Nevada 330105-00-05-10-02-00 3300 XL 8 mm Reverse Mount Probe delivers industry-leading performance for critical machinery monitoring. Its eddy current sensor technology enables precise measurement of both static position and dynamic vibration, ensuring reliable operation of fluid-film bearing machines. The system's API 670 compliance guarantees accuracy and stability under extreme operating conditions.
Installation flexibility is enhanced by the reverse mount design, allowing the probe to fit into tight spaces without sacrificing measurement precision. The miniature ClickLoc connector and durable 1-meter cable facilitate quick integration into the 3300 XL system, streamlining maintenance and reducing downtime.
Moreover, the 330105-00-05-10-02-00 probe supports full interchangeability with older 3300 series 5 mm and 8 mm components. This backward compatibility simplifies upgrades and replacements, reduces calibration requirements, and ensures long-term operational consistency across industrial installations. Its robust PPS tip and stainless-steel case make it suitable for harsh industrial environments, providing both reliability and longevity.
The 330105-00-05-10-02-00 Bently Nevada 3300 XL 8 mm Reverse Mount Probes may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330105-00-05-10-02-00 3300 XL 8 mm Reverse Mount Probes Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330105-00-05-10-02-00 3300 XL 8 mm Reverse Mount Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330105-00-05-10-02-00
- Condition New Original ready stock
- Product Family 330105-02-12-10-02-05,330105-02-12-10-02-00,330105-02-11-10-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Large Bearing Housing Monitoring: Widely used in bearing housings of steam turbines and centrifugal compressors, in conjunction with 7200 or 3300 series probe housings.
- High Pressure/Sealed Environment: When the machine interior is filled with lubricating oil or pressurized, reverse installation allows for probe replacement without removing the machine cover or depressurizing.
- Axial Displacement Monitoring: Utilizing its 2mm linear range, it monitors the rotor's movement relative to the thrust bearing.
- Key Phase/Speed Measurement: Due to the typically robust reverse mounting bracket, it is suitable for acquiring speed signals by aligning with the keyway in high-speed rotating environments with oil mist.
- Electrical Isolation Protection: During installation, ensure there is no accidental grounding between the probe housing and the machine housing (achieved through the preamplifier's isolation mounting plate) to prevent electromagnetic interference (EMI).
- Connector Sealing Protection: ClickLoc™ connectors must be sealed with self-fluxing insulating tape (such as Bentley 40113-02) or heat shrink tubing. Lubricating oil must never enter the connector, as this will cause signal drift.
- Physical Cable Protection: The included 1-meter cable should be sheathed in a stainless steel flexible conduit (armored) or secured in a dedicated cable tray to prevent cable abrasion and breakage due to machine vibration.
- Ambient Temperature Control Protection: Ensure the operating environment does not exceed 177°C (350°F). If the ambient temperature is extremely high, consider adding cooling fans or selecting a high-temperature-specific model.
- Upgrade from 7200 Series: The 3300 XL system is fully compatible with older 7200 series (5mm/8mm) mounting holes, but a complete replacement (probe + cable + preamplifier) is required for better linearity and interference immunity.
- Armor Upgrade: If the field cables are highly susceptible to damage, it is recommended to upgrade the end code -02 (standard cable) to an option with stainless steel armor (e.g., -12) to enhance resistance to mechanical damage.
- Integrated Monitoring Upgrade: Consider integrating the signal into the Bently Nevada 3500 monitoring system or the Orbit 60 next-generation platform for digital diagnostics and predictive maintenance.
- Digital Output Upgrade: In new projects, tachometers with Modbus or Ethernet outputs can be used to directly convert displacement signals into digital quantities.