Features:
- CSA, ATEX, IECEx certified for installation in explosive atmospheres.
- CE mark compliant without special shielding or metallic housings.
- Supports DIN-rail/panel mount with SpringLoc tool-free terminals.
The 330180-X2-05 MOD:163358-02 carries multiple hazardous area approvals including CSA, ATEX, and IECEx certifications. This makes the 330180-X2-05 MOD:163358-02 suitable for installation in potentially explosive atmospheres, including Class I Zone 0 and Zone 2 environments. The 330180-X2-05 MOD:163358-02 is designed to meet international safety standards for industrial monitoring applications where explosive gases or dust may be present. This certification ensures that the 330180-X2-05 MOD:163358-02 can be safely deployed in refineries, chemical plants, and other hazardous industrial facilities.
The 330180-X2-05 MOD:163358-02 features improved RFI/EMI immunity that satisfies European CE mark approvals without requiring special shielded conduit or metallic housings. This allows the 330180-X2-05 MOD:163358-02 to be installed in fiberglass housings without adverse effects from nearby radio frequency signals. The 330180-X2-05 MOD:163358-02's immunity to interference ensures reliable signal processing in environments with variable frequency drives, radio transmitters, and other electromagnetic noise sources commonly found in industrial settings.
The 330180-X2-05 MOD:163358-02 supports both high-density DIN-rail installations and traditional panel mount configurations, sharing an identical 4-hole mounting footprint with older Proximitor Sensor designs. The 330180-X2-05 MOD:163358-02 uses SpringLoc terminal strips that require no special installation tools and facilitate faster, more robust field wiring connections by eliminating screw-type clamping mechanisms. The 330180-X2-05 MOD:163358-02 also features electrical isolation through its mounting base, eliminating the need for separate isolator plates.
The 330180-X2-05 MOD:163358-02 Bently Nevada Proximitor Sensor may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330180-X2-05 MOD:163358-02 Proximitor Sensor Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330180-X2-05 MOD:163358-02 Proximitor Sensor Specs
General
- Manufacturer GE / Bently Nevada
- Model 330180-X2-05 MOD:163358-02
- Condition New Original ready stock
- Product Family
330180-X1-05 MOD:143945-05,330180-X1-05 MOD:145004-57
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Fluid-Film Bearing Machinery Diagnostics: Extensively deployed on critical rotating machinery utilizing journal bearings, such as large steam turbines, high-speed turbocompressors, and industrial generators.
- Radial Vibration & Thrust Position Monitoring: Measures microscopic, high-frequency radial shaft deflection (dynamic vibration) as well as continuous axial movement (static thrust position) to prevent catastrophic rotor-to-stator friction.
- Keyphasor® Phase & Speed Referencing: Targets shaft keyways or notches to deliver an instantaneous once-per-turn voltage pulse, enabling upper-level control loops to calculate precise phase angles and RPM metrics.
- Physical Input Terminals: Features a single, isolated coaxial mini-coaxial connector that accepts the incoming analog signal from a 3300-series 5 mm or 3300 XL 8 mm proximity probe and matching extension cable.
- VT (Voltage Supply): Typically requires a continuous -24 Vdc input feed from the host monitor.
- Interchangeability & Standard Scale Factor: Operating under its calibrated parameters, the system outputs a standardized linear scale factor of 200 mV/mil (7.87 V/mm) across its standard measurement corridor.
- Hazardous Area Approvals: Fully certified under CSA, ATEX, and IECEx framework regulations for installation inside volatile, gas-exposed industrial landscapes.
- Explosion Protection Topologies: Rated for Intrinsic Safety (Ex ia) when paired with approved galvanic isolation barriers or zener barriers at the monitor rack. It is also approved for Non-Incendive (Ex nA / Division 2) zones without barriers under controlled electrical conditions.
- API 670 Standard Alignment: Fully satisfies the technical baseline metrics established by the American Petroleum Institute (API) 670 Standard for machinery protection systems. This guarantees strict linear accuracy, temperature stability, and structural uniformity.