Features:
- Patented FluidLoc technology seals the cable interior, preventing oil and other industrial fluids from leaking out of machine casings through the cable path.
- Armored cable provides mechanical protection against crushing and abrasion, while CSA/ATEX/IECEx approvals enable installation in explosive environments.
- Corrosion-resistant connectors require only finger-tight torque with audible click confirmation and include a locking mechanism that prevents loosening from vibration.
The 330130-070-11-05 incorporates patented FluidLoc technology, a critical feature for turbomachinery applications where proximity probes are mounted inside bearing housings. In standard cables, oil can migrate through the cable interior and leak out at termination points, creating safety hazards and environmental contamination. FluidLoc seals the cable's internal structure, preventing any fluid migration through the conductor bundles or insulation layers. This makes the 330130-070-11-05 essential for compressors, steam turbines, and gas turbines where probe cables pass through oil-filled cavities.
The 330130-070-11-05 features armored construction that provides superior mechanical protection compared to standard extension cables. The armor resists crushing, abrasion, cutting, and impact damage, making this cable suitable for industrial environments where cables may be exposed to foot traffic, falling tools, or contact with sharp metal edges. Additionally, agency approval option 05 provides CSA, ATEX, and IECEx certifications for installation in potentially explosive atmospheres such as refineries, chemical plants, and offshore platforms.
The 330130-070-11-05 uses gold-plated ClickLoc connectors that represent a significant improvement over previous connector designs. These connectors are highly corrosion-resistant, ensuring reliable electrical contact even in humid or chemically aggressive environments. Installation requires only finger-tight torque – an audible "click" confirms proper engagement, eliminating the need for torque wrenches or special tools. The specially engineered locking mechanism prevents connectors from loosening due to machine vibration, a common failure mode in industrial monitoring systems.
The 330130-070-11-05 Bently Nevada Extension Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL)by the manufacturer (OEM).
Bently Nevada 330130-070-11-05 Extension Cable Manuals, Datasheets,Drivers,Link
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not included with this equipment unless listed in the above stock item description.All prices are shown in USD.
Bently Nevada 330130-070-11-05 Extension Cable Specs
General
- Manufacturer GE /Bently Nevada
- Model 330130-070-11-05
- Condition New Original ready stock
- Product Family
330130-070-11-00,330130-070-11-CN,330130-070-11-RU
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
- Critical Machinery Monitoring: Widely installed on heavy utility assets such as steam turbines, gas turbines, multi-stage centrifugal or axial compressors, large industrial fans, water pumps, and generators.
- Dynamic & Static Metric Acquisition: Works alongside an 8mm proximity probe and a Proximitor sensor to measure critical machine health parameters: Radial Vibration (shaft orbit behavior), Axial Position (thrust displacement), Eccentricity, and Speed / Keyphasor phase-referencing.
- Corrosive Fluid & Heavy Physical Environments: The 11 option features an interlocking stainless steel armor to resist heavy physical compression and mechanical pinching during plant overhauls. Simultaneously, the patented FluidLoc technology is custom-designed to prevent turbine lube oil, steam, or chemical condensation from wicking through the inside of the cable and into control rooms.
- North America: Approved by CSA for Class I, Division 1 and Division 2 environments.
- Europe & International: Dual-certified under ATEX and IECEx frameworks for Zone 0, Zone 1, and Zone 2 hazardous areas. When connected through a galvanic safety barrier, it creates an Intrinsically Safe (IS) circuit that limits electrical energy so that it cannot generate an ignition spark, even if the cable is sheared or crushed.
- Electromagnetic Compatibility (CE Mark): Provides highly effective immunity against Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI), allowing direct cabinet installation without expensive metal conduits.
- Seamless 10-Meter System Calibration: This 7.0-meter cable is built to match a 3.0-meter 3300 XL 8mm proximity probe and a 10-meter type Proximitor sensor. The components are tuned such that 7.0m cable + 3.0m probe = 10m total system electrical length.
- Total Interchangeability: Within the same 3300 XL 8mm product family, this 7.0-meter extension cable is completely interchangeable. If an old cable is damaged, a replacement can be dropped into the loop without requiring a bench recalibration or scale factor tuning of the sensor or probe. This drastically reduces maintenance time.
- Backward Compatibility with Legacy Systems: This cable is engineered to be backward compatible with legacy, non-XL Bently Nevada 3300 series 5mm and 8mm transducer system parts.