Features:
- 3300 XL 8 mm sensing tip with an unarmored 3/8-24 UNF probe body.
- 5.0 in case length is paired with a 0.5 m standard cable.
- Miniature ClickLoc coaxial connection supports the specified probe interface.
This order represents a compact 3300 XL probe configuration with the listed mechanical and cable options.
The probe supplies the sensing element used by a compatible 3300 XL monitoring channel.
Verify target clearance, thread engagement and cable routing before fitting the replacement probe.
The 330101-00-50-05-02-00 is supplied as a Bently Nevada 3300 XL 8 mm probe configuration.
Verified resources for Bently Nevada 330101-00-50-05-02-00:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Non-contact shaft displacement measurement with a 3300 XL monitoring channel.
- Machine-train vibration protection and condition monitoring installations.
- Replacement probe positions that require a miniature ClickLoc cable interface.
- Transfers the probe signal through a miniature coaxial ClickLoc connector.
- Uses the standard 3300 XL probe cable interface for the associated Proximitor.
- Maintains the electrical connection path defined by the 3300 XL 8 mm system.
- The 8 mm probe geometry is intended for the 3300 XL displacement measurement system.
- The 0.5 m total length suits compact sensor-to-Proximitor cable routes.
- Unthreaded and case dimensions can be ordered in 0.1 in increments within the published limits.
- The ordered EE 00 configuration does not include agency approval.
- Keep the unarmored probe cable protected from mechanical damage during installation.
- Confirm the receiving system and site requirements before placing the probe in service.