Features:
- Interface Between the 330903-05-19-05-02-00 11 mm Proximitor Probe and 3300 XL / 3500 Monitoring Systems
- Combines Capability of Shaft Displacement and Vibration Measurement with High-Resolution Signal Stability
- Operates in Conjunction with Matched Proximitor Sensors and Extension Cables for Critical Rotating Machinery
The Bently Nevada 330903-05-19-05-02-00 operates as a high-precision 11 mm Proximitor probe in 3300 XL and 3500 monitoring systems, providing accurate shaft displacement and vibration measurements for critical rotating machinery. It continuously converts mechanical shaft motion into high-resolution electrical signals, which are transmitted through the matched Proximitor sensor and extension cable to ensure reliable, stable readings. Standard signal transmission is ensured with the 330903-05-19-05-02-00, while optional configurations with extended probe lengths or specialized housings allow seamless adaptation to unique machine geometries and demanding industrial environments. This probe incorporates improvements in measurement linearity, signal stability, and environmental resistance over previous designs, delivering dependable long-term performance.
The Bently Nevada 330903-05-19-05-02-00 provides essential proximity measurement functions for the entire monitoring system and is a critical component of the machine protection path, directly affecting the accurate detection of shaft displacement and vibration. One 330903-05-19-05-02-00 probe is typically required per monitored shaft, depending on the measurement configuration and redundancy requirements. The 330903-05-19-05-02-00 is installed in-line with the matched Proximitor sensor and extension cable, forming a complete transducer system for reliable signal transmission.
For critical machinery monitoring applications, the 3300 XL and 3500 systems using the 330903-05-19-05-02-00 probe can be configured in dual-redundant measurement setups. In addition to standard single-probe operation, the redundant configuration provides automatic failover to a backup probe if the primary measurement signal is lost or falls outside configured tolerance limits. The redundant measurement system continually monitors the health of both probes, and if the primary probe signal becomes unstable or invalid, the system automatically switches to the secondary probe and logs an event in the System Event List.
The 330903-05-19-05-02-00 Bently Nevada precision 3300 XL Proximitor probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330903-05-19-05-02-00 11 mm Proximitor Probe Installation and Operation Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330903-05-19-05-02-00 11 mm Proximitor Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330903-05-19-05-02-00
- Condition New Original ready stock
- Product Family 330903‑00‑05‑05‑02‑05,330903‑00‑06‑05‑02‑05,330903‑00‑09‑05‑02‑05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.