Features:
- Standard 3/8-24 UNF Thread Mounting with Armored Cable Protection
- Combines Proximity Sensing Capability with Robust Environmental Shielding
- Operates in Conjunction with the 3300 NSv Transducer System
The 330909-00-60-10-02-00 operates as the 3300 NSv Proximity Probe in machinery protection applications, providing reliable vibration and position measurements to monitoring systems. It continuously converts changes in eddy current proximity into electrical signals and transmits these signals through the armored cable to support steady state monitoring of rotating equipment. Seamless integration is standard with the 330909-00-60-10-02-00, however using an optional extension cables and adapters will allow flexible installation in various machinery configurations. The 330909-00-60-10-02-00 has made improvements in several areas over previous probe designs in addition to incorporating Miniature coaxial ClickLoc connector capability within the 3300 NSv system.
The 330909-00-60-10-02-00 provides essential sensing functions common to the entire transducer system, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall machinery protection system. One or more 330909-00-60-10-02-00 probes are required per measurement point depending on the desired monitoring coverage. The 330909-00-60-10-02-00 occupies minimal mounting space on the machine housing and is always located at the measurement position (target area, the dedicated sensing point).
For Dual Probe Redundancy applications, the 3300 NSv System requires a second 330909-00-60-10-02-00 proximity probe installed in the redundant position. In addition to standard single probe operation, the redundant configuration also performs automatic signal validation. The 3300 NSv dual probe configuration executes failover using the internal circuitry specified in the monitor options. Using this method, the redundant probe system continually monitors the health of both sensors. If the system detects that the primary 330909-00-60-10-02-00 probe is no longer providing stable output (outside configured signal/tolerance levels), it will automatically transfer the measurement to the secondary probe and place an event in the System Event List.
The 330909-00-60-10-02-00 Bently Nevada 3300 NSv Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330909-00-60-10-02-00 3300 NSv Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330909-00-60-10-02-00 3300 NSv Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330909-00-60-10-02-00
- Condition New Original ready stock
- Product Family 330909-00-60-10-02-05,330909-00-60-05-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Embedded Housing Reverse Mounting: Specifically designed for compact units where probe clearance cannot be adjusted from the outside of the bearing housing. The probe is screwed into a dedicated mounting sleeve or bracket from the inside out.
- Industrial Blower Thrust Clearance Monitoring: Widely used in high-speed bladed blowers, utilizing their narrow field of view to precisely capture micron-level axial movement at the edge of the extremely small thrust disc.
- Gearbox High-Speed Shaft Monitoring: Deployed on the high-speed, small-diameter input shaft (diameter often less than 51 mm) of various industrial gearboxes, avoiding lateral metal interference easily caused by ordinary 8mm probes.
- Closed Turbine Expander Monitoring: Inside the turbine expander of cryogenic or air separation units, in dead angles severely obstructed by mechanical structures, a reverse compact design provides absolute axial displacement monitoring.
- Physical Structure and Specifications: Belonging to the 3300 NSv series reverse-mount probes, its standard housing features a 3/8-24 inch thread design, specifically designed for internal or rear mounting via a mounting bracket.
- Stringent Linear Response Standards: Fully compliant with Bentley's non-contact measurement specifications, providing extremely high dynamic signal reproducibility within a rated linear range of 1.5 mm (60 mils).
- International Enclosure Protection Standards: The probe head and cable transition area meet IP68 gas and liquid high-pressure sealing standards, effectively preventing industrial fluid leakage.
- Stringent Electromagnetic Compatibility Standards: Electrical design complies with EN 61326-1 industrial electromagnetic compatibility (EMC) standards, effectively suppressing field interference from high-power solenoid valves or frequency converters.
- Reverse Blind Hole Threadless Configuration: This selection code includes a dedicated length configuration with a total housing length of 6.0 inches and a 1.0-inch threadless portion, facilitating smooth alignment within specific bearing sleeves.
- Integrated Cable Length Configuration: This specific hardware comes with a 0.5-meter (1.6-foot) high-performance coaxial cable. An extension cable must be connected in the field to form a standard 5-meter or 7-meter measurement loop.
- High-Speed Coaxial Connector Configuration: Features a locking miniature male coaxial connector at the end, factory-tested for high-frequency impedance matching with no contact attenuation.
- No Explosion-Proof Shielding Configuration: This custom designation corresponds to a standard unarmored, connector-free basic configuration, suitable for installation in mild mechanical areas protected by external conduits or electrical protection boxes.
