Features:
- Provides defined NSV Probe electrical output stability with 4.2 ± 0.5 Ω dc resistance and 0.002 mil pp/gauss output voltage specification.
- Miniature coaxial ClickLoc connector with standard cable ensures structured signal connection integrity.
- Constructed with PPS probe tip material and AISI 304 stainless steel probe case material for defined structural composition.
Bently Nevada 330909-00-80-10-02-05 is designed as part of the NSV Probe configuration with standardized dimensional and electrical parameters. It defines a total length of 1.0 meter (39 in) and supports an overall case length option of 0.8 in, maintaining fixed structural constraints. The model Bently Nevada 330909-00-80-10-02-05 operates within a temperature range from -52°C to +177°C, ensuring consistent material and electrical stability across the defined limits.
The Bently Nevada 330909-00-80-10-02-05 incorporates a miniature coaxial ClickLoc connector and standard cable interface to maintain electrical continuity within specified design parameters. Its probe dc resistance of 4.2 ± 0.5 Ω and output voltage of 0.002 mil pp/gauss define its signal characteristics. Bently Nevada 330909-00-80-10-02-05 maintains structural consistency through PPS probe tip material and AISI 304 stainless steel casing specification.
In industrial measurement configurations, Bently Nevada 330909-00-80-10-02-05 is aligned with NSV Probe system architecture, including defined mechanical and electrical design constraints. The model Bently Nevada 330909-00-80-10-02-05 integrates standardized length and connector configurations to ensure uniform installation parameters. Across operational conditions, Bently Nevada 330909-00-80-10-02-05 preserves its defined resistance, output voltage, and material composition without deviation from specified data limits.
The 330909-00-80-10-02-05 Bently Nevada 3300 NSv Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330909-00-80-10-02-05 3300 NSv Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330909-00-80-10-02-05 3300 NSv Probe Specs
General
- Manufacturer Bently Nevada
- Model 330909-00-80-10-02-05
- Condition New Original ready stock
- Product Family 330909-00-80-10-02-00,330909-00-80-10-01-05,330909-00-80-10-02-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Narrow Field of View: Specifically designed for environments with limited installation space, it can operate in compact areas where standard 5mm or 8mm probes cannot be used.
- Interference Immunity: Excellent resistance to chemical corrosion allows it to be installed in harsh environments such as various process gas compressors.
- Small Target Measurement: Optimized for measuring small targets, suitable for precision scenarios with shaft diameters less than 51mm or planar targets less than 15mm.
- Strong Connection: Utilizing patented TipLoc molding technology and CableLoc design, it ensures a robust connection between the probe head and the cable, with high tensile strength.
- Fluid Dynamics Equipment: Primarily used for monitoring rotating machinery employing fluid diaphragm bearings.
- Compressor Monitoring: Widely used in centrifugal air compressors, refrigeration compressors, and various process gas compressors.
- Vibration and Displacement Measurement: Enables radial vibration measurement and axial (thrust) position monitoring of rotating shafts.
- Speed and Phase Reference: Used as a Keyphasor (phase reference) sensor for speed measurement and phase analysis.
- System Compatibility: As part of the 3300 series, this probe is fully mechanically and electrically compatible with previous 3300 RAM proximity detection systems.
- Upgradeable Replacement: Directly replaces older 3000 series 190 probes, offering superior side view characteristics at the same clearance.
- Quick-connect/remove: All components are equipped with gold ClickLoc connectors, providing a reliable locking mechanism to prevent loosening during vibration.
- Environmental Protection: Dedicated connector protective sleeves can be used to effectively prevent liquid from entering the connector, ensuring that electrical signals are unaffected by the environment.