Features:
- Interface Between the 3300 NSv Proximity Probe and Machine Monitoring Systems
- Integrates Eddy Current Sensing Technology with Enhanced Chemical Resistance
- Operates in Conjunction with 3300 XL NSv Proximitor Sensors and Extension Cables
The 330910-00-13-05-02-00 Bently Nevada 3300 NSv Proximity Probe functions as a critical sensing element within the 3300 XL NSv Proximity Transducer System, providing reliable radial vibration, radial position, and axial displacement measurements for machinery with tight installation requirements. It continuously converts physical gap distance between the probe tip and target surface into a proportional electrical signal, transmitting this signal through the extension cable to the 3300 XL NSv Proximitor Sensor for conditioning and output generation. Seamless compatibility with existing 3300 RAM systems is standard with the 330910-00-13-05-02-00, however using the complete NSv transducer system will allow enhanced side-view performance and small target measurement capability beyond the limitations of previous 3000-series 190 Transducer Systems. The 330910-00-13-05-02-00 has made improvements in several areas over previous proximity probe designs in addition to incorporating patented TipLoc molding and CableLoc attachment methods within the NSv probe family.
The 330910-00-13-05-02-00 provides essential sensing functions common to the entire transducer system, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall vibration and position monitoring system. One 330910-00-13-05-02-00 probe is required per measurement channel depending on the desired monitoring point. The 330910-00-13-05-02-00 occupies a minimal mounting footprint with an overall case length of 130 mm and is always installed with an M10X1 thread engagement in the designated probe mounting location.
For Dual Redundant Monitoring applications, the 3300 XL NSv System may require a second 330910-00-13-05-02-00 probe installed at an orthogonal position. In addition to standard single probe operation, the redundant configuration also performs cross-channel verification. The 330910-00-13-05-02-00 dual probe configuration executes validation using the internal circuitry specified in the monitoring system options. Using this method, the redundant monitoring system continually monitors the health of both probes. If the system detects that the primary 330910-00-13-05-02-00 probe is no longer providing stable output (outside configured gap voltage/tolerance levels), it will automatically transfer the measurement reference to the secondary probe and place an event in the System Event List.
The 330910-00-13-05-02-00 Bently Nevada 3300 NSv Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330910-00-13-05-02-00 3300 NSv Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330910-00-13-05-02-00 3300 NSv Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330910-00-13-05-02-00
- Condition New Original ready stock
- Product Family 330910-00-13-05-02-05,330910-00-13-05-02-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Compressor Monitoring: Primarily used in centrifugal air compressors, refrigeration compressors, and process gas compressors.
- Small Target Measurement: Ideal for radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).
- Radial Vibration/Position: Monitoring fluid-filmed bearing machines. Axial (Thrust) Position: Tracking shaft displacement. Speed Sensing: Used for tachometer and zero-speed measurements. Phase Reference: Generating Keyphasor signals for machine diagnostics.
- Connector Type: Features a Miniature Coaxial ClickLoc connector. These connectors are gold-plated and designed to lock into place to prevent loosening.
- Interchangeability: Fully compatible and interchangeable with previous Bently Nevada 3300 RAM probes and extension cables.
- Uses 75 Ωcoaxial cable with FEP (Fluoroethylene propylene) insulation.
- Supports field wiring up to 305 meters (1,000 feet) between the Proximitor Sensor and the monitoring equipment.
- Recommended field wiring is a three-conductor shielded triad cable (0.2 to 1.5 mm²).
- Environmental Protection: CE certified with improved RFI/EMI immunity, allowing it to achieve European approvals without special mounting.
- Hazardous Area Approvals: When ordered with the appropriate dash option (e.g., -05), it meets standards for ATEX, IECEx, and CSA/NRTL/C.
- Quality Standards: Tested to IEC 68-2-3 for damp heat. The 3300 XL 8 mm variant complies with API 670 Standard for mechanical and accuracy performance, which the NSv system often complements in the same facility.