Features:
- Uses 9-pin D-shell connectors for the primary CHARM baseplate extension link.
- Carries redundant RS-485 communications between separated Electronic Marshalling sections.
- Distributes 24 VDC field and CHARM power across the extender connection.
SE4603T05 combines primary connection of 9-pin D-shell, primary bus of RS-485 communications, and primary power of 24 VDC field and CHARM power in the DeltaV Electronic Marshalling platform.
It extends the redundant CHARM baseplate buses through the top male cable connections. This role connects the CHARMs Baseplate Extender with Top Cable Connectors to the surrounding DeltaV Electronic Marshalling architecture.
Before commissioning, match the top male connection to the corresponding bottom extender; observe the extender-pair and bus-length limits; and install the supplied identifier and separation wall.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE4603T05:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Extends a CHARM baseplate row when the planned cabinet layout requires a separated cable connection.
- Carries redundant communications and power between separated sections of an Electronic Marshalling assembly.
- Provides the top connection point for supported extender cables serving a CHARM baseplate row.
- Provides a 9-pin D-shell interface for the secondary connection within the supported extender arrangement.
- Transfers RS-485 communications across the approved link between connected CHARM baseplate sections.
- Carries 24 VDC field power and CHARM power through the same baseplate extension assembly.
- Mounts at the top male connection point of the supported baseplate-extender pair.
- Includes the baseplate identifier and separation-wall hardware required for the installed arrangement.
- Keep the supplied identifier and separator with the assembly during installation and future service.
- Compare the complete part number with the unit nameplate before selecting replacement hardware.
- Pair the top male connection with the corresponding bottom extender used in the same baseplate row.
- Keep the completed extender pair and connected bus length within the specified installation limits.