Features:
- KJ2006X1-BM1 has a documented local power of 5 VDC at 1.4 A maximum for this M-series VIM2 module.
- KJ2006X1-BM1 has a documented storage-temperature range of -40 to 85 degrees C for this M-series VIM2 module.
- KJ2006X1-BM1 provides 48 MB of documented user memory for this M-series VIM2 module.
The current ordering configuration is KJ2006X1-BM1, the DeltaV M-series Virtual I/O Module 2 Card identified for the DeltaV M-series VIM2.
KJ2006X1-BM1 performs the documented M-series VIM2 module function within the DeltaV M-series Virtual I/O Module 2 architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, match the BM1 card identity, remove power before card handling, and verify driver licensing and network design.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ2006X1-BM1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Provide the VIM2 hardware used for non-intrusive simulation of M-series I/O with DeltaV Mimic.
- Interface M-series controllers with Ethernet I/O networks through supported Modbus TCP or EtherNet/IP drivers.
- Support process-simulation testing in which the controller communicates with simulated I/O without changing control strategies.
- KJ2006X1-BM1 requires Supported M-series carrier right slot for the documented mounting associated with this M-series VIM2 module.
- Match KJ2006X1-BM1 to the exact carrier, terminal, and I/O hardware documented for its DeltaV M-series Virtual I/O Module 2 installation.
- Check the complete ordering code and hardware revision before replacing KJ2006X1-BM1 with a similar assembly.
- Install KJ2006X1-BM1 with Supported M-series carrier right slot as the specified mounting for its DeltaV M-series Virtual I/O Module 2 hardware.
- Install KJ2006X1-BM1 only with the carrier, terminal, and field-wiring components documented for this M-series VIM2 module.
- Verify keying, circuit ratings, and power isolation before connecting or removing KJ2006X1-BM1.
- KJ2006X1-BM1 operates within the documented -40 to 60 degrees C temperature range for this M-series VIM2 module.
- Operate KJ2006X1-BM1 only within the temperature and humidity limits published for this M-series VIM2 module.
- Maintain the documented enclosure and contamination conditions around the installed KJ2006X1-BM1 hardware.