Features:
- Supports certified use in Class I Division 2 and Zone 2 installations.
- Must not be inserted or removed while energized in a hazardous location.
- Contains no field-serviceable components and is replaced as a complete assembly.
KL2001X1-BA1 combines hazardous-area use of Class I Division 2 and Zone 2, insertion rule of Do not insert or remove while energized in a hazardous area, and serviceable parts of None in the DeltaV SIS platform.
It executes safety logic within the DeltaV SIS CHARM architecture. This role connects the CHARMs Smart Logic Solver to the surrounding DeltaV SIS architecture.
Before commissioning, verify the certified SIS architecture and project revision; remove power before insertion or removal in hazardous locations; and retain the exact KL2001X1-BA1 hardware identity.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KL2001X1-BA1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Executes configured safety-instrumented functions within the supported DeltaV SIS architecture.
- Integrates safety logic with the CHARMs-based safety I/O arrangement used by the installed system.
- Supports approved hazardous-area service when mounted in accordance with the specified installation conditions.
- Operates across the specified ambient-temperature range of -40 to +70 degrees C.
- Supports 5 to 95% relative humidity when the installed environment remains non-condensing.
- Meets ISA-S71.04 Class G3 requirements for airborne-contaminant exposure during service.
- Receives +24 VDC input power at 325 mA through the supported logic-solver assembly.
- Requires no field calibration before the installed solver is placed into operation.
- De-energize the assembly before inserting or removing the solver in a hazardous location.
- Integrates with the DeltaV SIS control architecture used for safety logic and associated I/O.
- Match the certified SIS architecture and project revision to the requirements of the installed system.
- Use the exact hardware identity specified for the logic-solver assembly when ordering a replacement.