Features:
- Input: 24 VDC +/-20% at 6.1 A
- System output: 12 VDC and 5 VDC regulated power
- Power architecture: Plug-and-play load sharing and redundancy
This ordering configuration is the SE5009 DeltaV S-series DC/DC system power supply.
It converts bulk 24 VDC power for the controller and associated I/O electronics while isolating system power from field power.
Confirm the total system load and apply the documented 12 VDC output derating when ambient temperature exceeds 60 deg C.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE5009:
- Supplying regulated system power to DeltaV S-series controllers and I/O electronics.
- Adding power capacity through the documented load-sharing architecture.
- Building redundant system-power arrangements from a bulk 24 VDC source.
- SE5009 provides regulated +12 VDC and +5 VDC outputs for DeltaV system electronics.
- Plug-and-play load sharing allows additional supplies to increase system-power capacity.
- Multiple supplies can also be arranged to provide power redundancy.
- From -40 to 60 degrees C, the outputs are +12 VDC at 8.0 A and +5 VDC at 2.0 A.
- From 60 to 70 degrees C, the +12 VDC output is reduced to 6.0 A while +5 VDC remains 2.0 A.
- SE5009 is specified for 5 to 95 percent relative humidity under non-condensing conditions.
- The power architecture provides immediate notification when a supply fails.
- Input protection uses an internal non-replaceable fuse.
- Overvoltage protection is specified at 110 to 120 percent.