Features:
- SLS redundant termination is the documented terminal role for KJ2201X1-JA1 as this SLS redundant terminal block.
- KJ2201X1-JA1 has a documented maximum a-c rating of 30 VDC at 1 A per channel for this SLS redundant terminal block.
- KJ2201X1-JA1 has a documented storage-temperature range of -40 to 85 degrees C for this SLS redundant terminal block.
The current ordering configuration is KJ2201X1-JA1, the DeltaV SIS SLS Redundant Terminal Block identified for the DeltaV SIS Logic Solver Hardware.
KJ2201X1-JA1 performs the documented SLS redundant terminal block function within the DeltaV SIS SLS1508 hardware architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, match the SLS hardware set, observe terminal current limits, and perform safety-loop validation after wiring.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ2201X1-JA1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Terminate field circuits for a redundant pair of DeltaV SIS SLS1508 logic solvers.
- Provide documented A-to-B and A-to-C channel connections within the SLS redundant termination arrangement.
- Support safety-loop wiring where the installed logic solvers, circuit ratings, and terminal configuration match JA1.
- Apply the documented power-removal and hazardous-area precautions before servicing KJ2201X1-JA1.
- Verify field-circuit ratings and the defined safe-state behavior for this SLS redundant terminal block.
- KJ2201X1-JA1 has a documented maximum a-b rating of 30 VDC at 30 mA per channel for this SLS redundant terminal block.
- Install KJ2201X1-JA1 only with the carrier, terminal, and field-wiring components documented for this SLS redundant terminal block.
- Verify keying, circuit ratings, and power isolation before connecting or removing KJ2201X1-JA1.
- Complete the documented wiring checks before placing the KJ2201X1-JA1 assembly in service.
- KJ2201X1-JA1 operates within DeltaV SIS as the documented SLS redundant terminal block.
- Match KJ2201X1-JA1 to the exact carrier, terminal, and I/O hardware documented for its DeltaV SIS SLS1508 hardware installation.
- Check the complete ordering code and hardware revision before replacing KJ2201X1-JA1 with a similar assembly.