Features:
- SE4006P2 provides two independently configurable serial ports for supported device communications.
- Each port supports RS-232 or RS-422/485 operation in the documented electrical interface modes.
- The interface handles 32 datasets in total, with a maximum of 16 datasets assigned to each port.
The current ordering configuration is SE4006P2, the DeltaV Simplex Serial Interface with Two Ports and Termination Block identified for the DeltaV S-series Serial Interface.
SE4006P2 performs the documented S-series simplex two-port serial interface assembly function within the DeltaV S-series Serial Interface architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, match each port's electrical mode, retain the correct termination block and wiring, and validate protocol timing and dataset mapping.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE4006P2:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Connect serial devices that exchange data with DeltaV through the documented two-port S-series interface.
- Integrate Modbus-compatible packaged equipment through independently configurable RS-232 or RS-422/485 serial links.
- Exchange up to 32 datasets across two serial ports, with a documented limit of 16 datasets per port.
- Configure SE4006P2 only with the protocol and interface parameters documented for its S-series simplex two-port serial interface assembly.
- SE4006P2 supports RS-232 and RS-422/485 physical interface modes for its documented communication ports.
- SE4006P2 supports 1 or 2 stop bits, which must match the communication settings of the attached device.
- SE4006P2 permits 7 or 8 data bits per serial character in the documented port configuration.
- Validate protocol timing and dataset mapping before commissioning the documented S-series simplex two-port serial interface assembly configuration. Confirm the completed work before placing SE4006P2 in service.
- Configure SE4006P2 with the settings and hardware keying specified for its S-series simplex two-port serial interface assembly.
- Install SE4006P2 only with the carrier, terminal, and field-wiring components documented for this S-series simplex two-port serial interface assembly.
- For SE4006P2's S-series simplex two-port serial interface assembly installation, verify keying, circuit ratings, matched field hardware, and power isolation before connection.
- The documented SE4006P2 assembly consists of Interface and termination block.