Features:
- Measures absolute vibration through an electro-dynamic seismic transducer.
- Selects omnidirectional operation up to 100°C.
- Includes a 10 m non-armored cable with open cable end.
The current ordering configuration is PR9268/017-100, combining the /01 omnidirectional sensor family with a 10 m non-armored open-ended cable.
It converts housing vibration velocity into a proportional electrical signal for machinery monitoring or protection equipment.
Before installation, verify the mounting direction, stiff support, cable polarity, shielding, measurement range and trip logic for the connected monitor.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson PR9268/017-100:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Measures absolute casing vibration on rotating machinery.
- Feeds vibration-velocity signals to compatible machinery monitoring channels.
- Supports protection measurements where an omnidirectional 100°C transducer is specified.
- The seismic moving coil generates an output proportional to vibration velocity above resonance.
- Measurement quality depends on a rigid mounting surface and the defined sensing direction.
- The selected range and alarm limits must be matched to the monitored machine.
- The /01x sensor family operates from -20 to +100°C, with short exposure up to 120°C.
- The housing carries IP65 protection when installed according to the guide.
- The selected non-armored cable must be protected from mechanical damage and aggressive conditions.
- Mount the transducer on a stiff, vibration-free holder using the documented mounting hardware.
- Route the 10 m cable without torsion or elongation and preserve the open-end conductor identification.
- Verify polarity, grounding and EMC-compatible cable routing before activating protection logic.