Features:
- Monitors vibration, gap or bias, thrust, and phase measurements for rotating machinery.
- Generates analysis outputs including nX phase, peak values, spectra, and orbit data.
- Integrates machinery-health information with the Emerson Ovation control environment.
The current ordering configuration is 5X00717G01, an Ovation machinery health monitor module for dynamic measurements.
It brings vibration, gap or bias, thrust and phase data into the control environment and supports derived analysis such as spectra and orbit information.
Before installation, verify probe type, scale factor, channel assignment, terminals, speed reference and machine-specific alarm settings.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 5X00717G01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Monitors shaft and bearing vibration on turbines, compressors, pumps, and other rotating equipment.
- Measures axial thrust and probe gap or bias for machinery-condition assessment.
- Provides spectra, orbit, and phase information for maintenance and diagnostic analysis.
- Acquires machinery-condition signals for continuous display and trending in Ovation.
- Supports vibration, gap or bias, thrust, and phase channel functions selected for the installed probes.
- Provides calculated dynamic results for equipment-health and maintenance decisions.
- Produces spectral information for identifying dominant vibration frequencies.
- Provides orbit data for evaluating shaft motion from paired radial probes.
- Calculates phase and peak values used to investigate rotating-machinery behavior.
- Configure each channel for the connected probe type, sensitivity, and measurement range.
- Set machine-specific alarm limits and analysis parameters in the Ovation monitoring configuration.
- Verify channel pairing and phase-reference assignments before using orbit or nX results.