Features:
- Provides eight 4–20 mA control outputs with HART communication.
- Combines the G01 electronics and G01 personality modules as one documented assembly.
- Updates HART device information to the controller on the specified cycle.
The current ordering configuration is
5X00062G01 + 5X00063G01, the Ovation 8-Channel HART Analog Output Electronics and Personality Module Pair documented for Ovation I/O paired assembly.
In the intended system role, each channel supplies a 4–20 mA control signal while sharing HART digital communication with a compatible field device. Passive PMOD circuits include user-accessible fusing.
For selection and commissioning, confirm field-device power, loop resistance, fuse rating, HART host path and database assignment before installation. Preserve calibration and valve or actuator setup for every channel.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 5X00062G01 + 5X00063G01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Positions intelligent control valves from Ovation analog-output commands, for its documented operating duty.
- Drives HART-capable current actuators while retaining device diagnostics, through the intended receiving-system interface.
- Supports maintenance communication with field devices on eight output loops, in the configured and commissioned installation.
- The G01 electronics and G01 personality modules are the documented partners for this assembly, as part of the documented hardware combination.
- Field devices must accept the assigned 4–20 mA range and HART communication, before field wiring or device integration is finalized.
- Loop resistance and power arrangement must support both current control and the digital carrier, so the receiving system interprets the configured signal correctly.
- Each channel is mapped to its control point, output scale and fail-state behavior, within the controlled engineering configuration.
- HART polling and device identity are configured in the applicable Ovation tools, preventing uncontrolled changes to the approved setup.
- Valve calibration remains a field-device task after the module pair is commissioned, so replacement work retains the approved settings.
- Eight independent current outputs serve the documented channel count, within the documented conversion or output architecture.
- Digital device information is refreshed to the controller at about two-second intervals, while each configured channel retains its assigned function.
- Passive personality-module circuits minimize additional active components in the field path, without adding unverified hardware or signal paths.