Features:
- Provides the phase-logic interface within an EX2000 excitation-control assembly.
- Uses six parallel center connectors plus additional upper and lower edge connections.
- Includes LED banks for local visibility of phase-interface status.
The connector distribution on DS200PLIBG1A separates central parallel interfaces from the remaining edge-mounted signal paths.
Onboard logic components condition and direct the phase-control information exchanged across those connections.
Indicator banks give the cabinet-level board a direct visual representation of its internal interface states.
The General Electric DS200PLIBG1A EX2000 Phase Logic Interface Board may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric DS200PLIBG1A EX2000 Phase Logic Interface Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Connector Distribution
- Center Bank: Six vertical pin connectors are arranged in parallel through the middle of the board.
- Upper Edge: Additional connectors along the top edge serve separate interface paths.
- Lower Edge: Bottom-edge connections complete the remaining board-to-board routes.
- Mounting Marks: Board-edge references assist alignment within the EX2000 assembly.
Phase-Control Routing
- Interface Role: The PLIB forms an electrical link between phase-logic circuit sections.
- Parallel Routes: The central connector bank carries multiple signals across adjacent assemblies.
- Edge Routes: Upper and lower connections separate supporting control paths from the center bank.
- Board Group: The G1 designation identifies the required PLIB hardware arrangement.
Local State Visibility
- LED Banks: Grouped indicators present phase-interface states at the board.
- Channel View: The banked layout separates visible status by circuit grouping.
- Cabinet Access: Indicators can be observed at the installed board position.
- Logic Relation: Displayed states originate from the onboard interface circuitry.
EX2000 Hardware Structure
- Logic Devices: Integrated circuits execute the board-level interface functions.
- Network Arrays: Resistor networks establish repeated conditioning paths in compact form.
- Discrete Parts: Individual resistors and capacitors support timing and signal conditioning.
- Assembly Type: The board uses the normal DS200 assembly format for EX2000 hardware.