Features:
- Direct Integration with the 24 VDC Power Source and Universal Backplane
- Auto-Ranging Electrical Protection with Current-Limiting Hardware Safeguards
- Full Compatibility Across any Model RX3i System CPU
The General Electric IC695PSD040F Power Supply Module operates as a Universal Base Power Supply within a PACSystems RX3i control system, delivering steady energy distribution to all connected modules. It utilizes an incoming 24 VDC primary power source—incorporating built-in auto-ranging functionality to eliminate jumper settings—to supply a maximum total output of 40 watts (comprising up to 30 watts at 3.3 VDC, 30 watts at 5 VDC, and 40 watts at 24 VDC relay power, with no isolated 24 VDC available) across the PCI-bus universal backplane. Designed for high hardware reliability, the IC695PSD040F features advanced diagnostics, smart switch fusing, and current-limiting behavior that automatically shuts down the power supply during a direct short to prevent damage to system hardware.
The General Electric IC695PSD040F Power Supply Module provides essential base power functions for the rack, directly maintaining the operational readiness and performance of the overall control setup. The module occupies a single slot on the universal backplane and features a simple snap-in mechanism that installs in the exact same manner as standard RX3i I/O modules.
Unlike multipurpose power supply designs configured for load-sharing or backup capacity, the IC695PSD040F does not support redundant or added-capacity configurations (redundant support is N/A). System backplane restrictions strictly dictate that the IC695PSD040F cannot reside on the same backplane with more than one power supply unit. Consequently, automatic failover or secondary backup supply configurations are not supported by this model, and exact backplane load requirements must be audited to ensure the entire system operates within the single supply's 40-watt capacity.
The IC695PSD040F General Electric Power Supply Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC695PSD040F Power Supply Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
General Electric IC695PSD040F Power Supply Module Specs
General
- Manufacturer General Electric
- Model IC695PSD040F
- Condition New Original ready stock
- Product Family IC695PSD040,IC695PSA140
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- PACSystems RX3i Control Racks: Supplies localized power to CPUs, coprocessors, and communication modules on universal backplanes.
- Process Automation Systems: Integrated into chemical processing, water treatment, and food manufacturing plants.
- Energy & Infrastructure Control: Utilized across power generation, oil and gas, and utility distribution networks.
- Discrete Manufacturing: Drives automotive assembly lines, material handling systems, and packaging machinery.
- Operating Temperature Range: 0°C to 60°C (32°F to 140°F) ambient.
- Storage Temperature Range: -40°C to +85°C (-40°F to 185°F).
- Relative Humidity Limits: 5% to 95%, non-condensing.
- Atmospheric Protection: Conformal coating options available for harsh chemical exposure.
- Regulatory Compliance: UL, cUL, CE, ATEX Class 1 Zone 2, and Marine certifications.
- Internal Backplane Outputs: 5.1 VDC, 3.3 VDC, and 24 VDC rails.
- Holdup Ride-Through Time: 10 milliseconds minimum during voltage dropouts.
- Peak Inrush Current: 4 Amps maximum for up to 100 milliseconds.
- Fault Diagnostics: Dedicated LED indicators for power, overload, and overtemperature status.