Features:
- Identifies MPU55 controller hardware within the Nexus OnCore family.
- Runs configured control application code on the universal controller platform.
- Uses matching firmware and project files to determine control behavior.
369B1860G0030 combines associated model of MPU55, controller role of Universal Nexus control platform, and execution of Runs application code in the Nexus OnCore platform.
It identifies the catalogue configuration associated with the MPU55 controller. This role connects the Nexus OnCore MPU55 Controller Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify the 369B catalogue number and MPU55 nameplate; confirm firmware and application compatibility; and match the installed panel and power architecture.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric 369B1860G0030:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Identifies an MPU55 controller intended for use within a Nexus OnCore control system.
- Runs configured application code on the associated MPU55 controller hardware.
- Provides the exact catalogue reference required for controller-spare identification and procurement.
- Receives 24 VDC operating power through the Nexus OnCore controller power arrangement.
- Consumes up to 7.2 W under the specified MPU55 controller configuration.
- Uses an integrated stand-alone computer to execute the configured control project.
- The controller nameplate specifies a certified ambient operating range from -20 to +50 degrees C.
- Mount the controller inside a suitable panel enclosure as part of the completed OnCore installation.
- Match the existing panel layout and power architecture before integrating replacement controller hardware.
- Match the complete controller part number with the installed unit nameplate before procurement.
- Compare the 369B hardware identity directly with the MPU55 nameplate fitted in the system.
- Confirm that the installed firmware and application files are compatible with the replacement controller.