Features:
- Functions as a universal Nexus OnCore controller for plant automation.
- Executes loaded application code for configured monitoring and control tasks.
- Adapts operating behavior to the installed controller firmware.
MPU56 combines controller role of Universal Nexus control platform, execution of Runs application code, and firmware role of Function depends on loaded controller firmware in the Nexus OnCore platform.
It runs application code as an integrated stand-alone controller for the Nexus system. This role connects the Nexus OnCore Controller Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify the project firmware and application compatibility; match the complete MPU56 regional suffix; and maintain enclosure, grounding, and power requirements.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric MPU56:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Executes configured control-application code within a Nexus OnCore control system.
- Provides the controller platform used for configured OnCore process-control functions.
- Supports certified panel-mounted industrial control installations when enclosure conditions are met.
- Operates from the regulated 24 VDC power source provided for the Nexus OnCore controller.
- Consumes up to 7.2 W under the specified controller configuration and operating conditions.
- Uses an integrated stand-alone computer to execute the configured control application.
- Carries a certified ambient operating range from -20 to +50 degrees C on the controller nameplate.
- Supports approved hazardous locations classified for Class I Division 2 and Zone 2 service.
- Requires panel mounting inside a suitable enclosure that maintains the specified installation conditions.
- Verify project firmware and application-file compatibility before commissioning the replacement controller.
- Match the complete regional part-number suffix to the controller installed in the existing system.
- Maintain the required enclosure, grounding, and power provisions throughout controller installation.