Features:
- Identifies the MAO50 analog output module within the Nexus OnCore family.
- Provides eight channels for configured current or voltage output signals.
- Drives compatible field loads from controller analog-output commands.
369B1842G5005 combines associated model of MAO50, output type of mA/V analog output, and channels of 8 in the Nexus OnCore platform.
It identifies the catalogue configuration associated with the MAO50 analog-output module. This role connects the Nexus OnCore MAO50 8-Channel Analog Output Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify both the catalogue and MAO50 nameplate identities; confirm current or voltage output configuration; and match field loads and panel wiring.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric 369B1842G5005:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Identifies an MAO50 analog-output module intended for a Nexus OnCore control system.
- Drives multiple current outputs or supported voltage commands to connected field devices.
- Provides the exact catalogue reference required for analog-output spare identification and procurement.
- Uses the 24 VDC supply distributed by the Nexus OnCore panel for analog-output operation.
- Consumes up to 6.55 W under the specified MAO50 analog-output configuration.
- Provides 4-20 mA outputs, with selected channels configurable for 1-5 VDC service.
- Specifies -20 to +50 degrees C as the certified ambient range on the analog-output module nameplate.
- Install the analog-output hardware in a suitable panel enclosure within the completed OnCore system.
- Match the connected field-load requirements with the existing panel wiring before commissioning.
- Match the complete catalogue number with the installed unit nameplate before ordering this module.
- Compare both the 369B part number and the MAO50 nameplate identifier on the existing hardware.
- Confirm whether the installed channels require the current-output or voltage-output configuration.