Features:
- Identifies the MLP50 programmable logic module within the Nexus OnCore family.
- Executes emergency-trip-system logic through a triple-modular-redundant architecture.
- Plugs into the matching BLP50 protection base for complete system integration.
369B1852G0007 combines associated model of MLP50, control function of TMR programmable logic control, and architecture of Triple modular redundant in the Nexus OnCore platform.
It identifies the catalogue configuration associated with the MLP50 TMR programmable logic control module. This role connects the Nexus OnCore MLP50 TMR Logic Control Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify both 369B1852G0007 and the MLP50 nameplate; match the installed base and application logic; and confirm firmware compatibility before commissioning.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric 369B1852G0007:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Identifies an MLP50 TMR logic-control module intended for the Nexus OnCore protection system.
- Supports emergency-trip-system logic within the associated redundant control architecture.
- Provides the catalogue-number reference needed to identify the exact logic-module spare.
- Operates from the 24 VDC supply provided through the Nexus OnCore system hardware.
- Consumes up to 6.8 W under the specified TMR logic-module configuration.
- Executes triple-modular-redundant (TMR) logic for supported emergency-trip-system applications.
- Defines -20 to +50 degrees C as the certified ambient range on the associated module nameplate.
- Requires panel mounting inside a suitable enclosure as part of the complete OnCore installation.
- Uses associated MLP50 hardware approved for Class I Division 2 and Zone 2 service.
- Match the complete catalogue number with the installed unit nameplate before ordering this spare.
- Compare the hardware identity directly with the MLP50 nameplate fitted in the existing assembly.
- Confirm compatibility with the installed base hardware and project application logic before replacement.