- Provides 8 GB of solid-state storage in a 2.5-inch PATA drive format.
- Uses a 44-pin IDE interface with visible Master and Slave selection markings.
- Integrates PowerArmor, SiSMART and SiSecure technologies for embedded storage management.
SSD-D08G-4300 51403645-400 is a Honeywell 8 gb industrial solid-state drive assembly designed for its documented industrial platform or application.
The supplied label photographs confirm a Western Digital SiliconDrive II SSD-D08G-4300, 8 GB PATA device with Master/Slave selection. Honeywell part number 51403645-400 is retained as the user-supplied order number; it is not printed on the visible SSD label.
Before installation or replacement, verify the complete catalog number, compatible hardware, wiring, configuration and installed-system requirements.
Availability, condition, price, and shipping time for SSD-D08G-4300 51403645-400 are confirmed during quotation.
Honeywell SSD-D08G-4300 51403645-400 8 GB Industrial Solid-State Drive Assembly Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Lists a 34 MB/s typical read transfer rate.
- Lists a 19 MB/s typical write transfer rate.
- Supports a 66 MB/s burst transfer rate with up to 2 ms controller overhead.
- Specifies 4,000,000 hours MTBF at 25 °C.
- Specifies fewer than one nonrecoverable error per 10^14 bits read.
- Provides a commercial 0–70 °C operating range for the non-I model designation.
- PowerArmor protects data against corruption or loss during power disturbances.
- SiSMART monitors and reports remaining useful storage life.
- SiSecure provides selectable protection, host binding, access control and secure-erasure functions.
- Embedded industrial control systems requiring 2.5-inch PATA storage
- Video-surveillance equipment using low-power embedded storage
- Storage-networking equipment requiring solid-state PATA media