Features:
- Provides two tri-state RS-232 communication interfaces.
- Uses the documented Flash-memory F/F hardware configuration.
- Has a manufacturer-listed pin-compatible successor, 10024/F/F.
The requested order identity is 10014/F/F, the Flash version of the legacy Honeywell communication module.
Its two serial channels support approved RS-232 data paths between the Central Part and connected equipment.
Confirm software level, port settings, cabling, grounding, and validation records even when using the named successor.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Honeywell 10014/F/F:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Sustain existing FSC serial connections that were engineered for the F/F communication board.
- Restore a Central Part link after the original port assignment and cable pinout are verified.
- Plan a controlled transition to 10024/F/F under the site safety-management procedure.
- Two tri-state ports implement the documented RS-232 electrical interface.
- Each channel must retain its original baud rate, framing, cable pinout, and connected-device role.
- Serial shielding and reference conductors should follow the approved Safety Manager cabinet drawings.
- Honeywell identifies 10024/F/F as pin compatible with the withdrawn module.
- Pin compatibility does not remove the need to confirm system software and application acceptance.
- Do not interchange F/F with H/I or other 10014 variants because their communication functions differ.
- Flash memory is part of the specific F/F module identity.
- Preserve the validated system and communication configuration before removing the installed board.
- After replacement, confirm both serial paths and the safety application through the approved test sequence.