Features:
- Redundant Dual-Rotor Cooling Performance
- Active Functional Safety Diagnostics
- Robust Fault-Tolerant Electrical Design
The HONEYWELL FC-FANWR-24R utilizes two independently balanced high-performance fan units engineered onto a single industrial-grade frame. This dual setup ensures continuous active air movement inside high-density controller chassis, preventing localized heat pockets and maintaining stable ambient conditions for nearby Safety Manager modules even during extended heavy process loads.
Equipped with an advanced potential-free readback relay and dedicated bright green status LEDs, the HONEYWELL FC-FANWR-24R delivers live diagnostic metrics. If either of the internal fans falls below the safety threshold of 1,500 RPM due to mechanical fatigue or dust obstruction, the readback circuit immediately breaks to trigger system alarms.
The electrical interface of the HONEYWELL FC-FANWR-24R is optimized for high reliability, incorporating hardwired reverse polarity diode protection and an onboard 2A fuse. This rugged layout prevents upstream cabinet power disruptions during field faults, ensuring the unit withstands extreme industrial voltage tolerances from 12V up to 29V DC.
The FC-FANWR-24R HONEYWELL Dual Fan Cooling Assembly Kit with Speed Readback may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
HONEYWELL FC-FANWR-24R Dual Fan Cooling Assembly Kit with Speed Readback Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
HONEYWELL FC-FANWR-24R Dual Fan Cooling Assembly Kit with Speed Readback
General
- Manufacturer HONEYWELL
- Model FC-FANWR-24R
- Condition New Original ready stock
- Product Family FC-TPSU-2430,FC-SDI-1624,FC-TSDI-1624
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Safety Manager Cabinet Protection: Deployed directly inside Honeywell critical process control and emergency shutdown (ESD) enclosures to maintain safe operating temperatures for dense processor packs and communication modules.
- High-Density I/O Rack Ventilation: Installed within Safety Universal I/O (RUSIO) and high-density termination setups to dissipate thermal loads generated by field loop currents and active barrier modules.
- Legacy Hardware Renewal Projects: Utilized as the primary direct-swap spare part during plant modernization turnarounds to replace aging, worn out cooling units across older Safety Manager installations.
- Harsh Distributed Control Environments: Applied in remote instrument enclosures, offshore oil platform control rooms, and petrochemical marshalling cabinets where active cooling verification is mandatory for remote diagnostic strategies.
- Quick-Connect Terminal Modular Fitting: Employs a pluggable 4-pole screw mating system that allows operators to safely swap fan modules during live system operations without disturbing adjacent wiring.
- Enclosure Chimney-Effect Placement: Typically integrated near top louvers or specific air ducts within Rittal TS cabinets to draw cool air up from the bottom of the enclosure and push heated air out.
- Dedicated Enclosure Grounding Path: Features explicit structural metallic contact zones and grounding paths that must be securely bonded to the main cabinet ground busbar to ensure full ESD protection.
- Unobstructed Air Vector Clearances: Requires careful layout mapping during cabinet assembly to guarantee that incoming wiring harnesses or dense field cabling do not block the high-volume 360 m³/hr intake grid.
- Industrial Thermal Extremes: Extensively tested to maintain stable mechanical rotor speeds and flawless relay state operation under ambient conditions ranging from -30°C to +75°C.
- Cabinet Power Architecture Tolerance: Accommodates standard unregulated industrial battery and power systems, operating reliably on any input voltage ranging between 12V and 29V DC.
- Sealed Enclosure IP20 Protection: Built with an IP20 ingress protection profile, meaning it must be installed inside filtered, dust-controlled electrical rooms or sealed cabinets to prevent moisture damage.
- Vibration and Industrial Mechanical Stress Shielding: Manufactured with reinforced structural mounting plates and ruggedized internal PCB solders to withstand the continuous low-frequency vibrations typical of heavy industrial heavy machinery areas.