Features:
- Single-channel SIL 2 analog output barrier for safety service
- 4 to 20 mA signal path with HART communication
- Three-way galvanic isolation with field-fault transparency
FC-UGAO01 is the safety version of Honeywell's universal barrier adaptor for one analog output channel. The backplane-mounted module is designed for intrinsically safe field devices in a universal marshalling arrangement.
The barrier transfers a 4 to 20 mA output and HART communication while isolating input, output and power circuits. Field-side open-wire conditions are passed transparently to the control system for diagnosis.
When applying FC-UGAO01, confirm the associated CC-UGIA0 or CC-UGIA01 interface, hazardous-area entity parameters, 24 V DC supply and maximum 650 Ohm load before energizing the loop.
The Honeywell FC-UGAO01 Analog Output Barrier Module for Safety can be quoted with official documentation and application-review support from Apter Power.
Honeywell FC-UGAO01 Analog Output Barrier Module for Safety Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Honeywell FC-UGAO01 Analog Output Barrier Module for Safety Specs
General
- ManufacturerHoneywell
- ModelFC-UGAO01
- ConditionNew Original ready stock
- Product FamilyHoneywell Safety Systems
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Analog output behavior
- Loop current: The barrier transfers a 4 to 20 mA analog output signal.
- HART data: HART communication is supported across the isolated channel.
- Load capacity: The specified output load can be as high as 650 Ohm.
- Fault reporting: An open field circuit is made visible to the control system.
Safety barrier construction
- Circuit separation: Input, output and supply are galvanically separated.
- Test voltage: Electrical isolation is specified at 1500 V AC.
- Polarity protection: The module includes protection against reversed supply polarity.
- Integrity level: FC-UGAO01 is documented for SIL 2 safety use.
Mounting and operating limits
- Temperature: The operating ambient range is minus 40 to plus 70 degrees C.
- Enclosure rating: The module carries an IP20 ingress-protection classification.
- Installation: FC-UGAO01 uses the documented backplane-mount arrangement.
- Dimensions: The module measures 141.5 x 85.75 x 10 mm.