Features:
- Two-unit HPM LLMux power adapter
- Supports RTD and thermocouple LLMux FTA combinations
- CE-compliant material number for the nonconformal version
The adapter sits between the MU-PLAM02 LLMux IOP and two low-level analog FTAs.
Two sixteen-channel FTAs create the thirty-two-point LLMux input arrangement.
The architecture remains inside the LLMux family and does not extend to RHMUX assemblies.
Apter Power supports Honeywell MU-TLPA02 51309204-125 Low-Level Multiplexer Power Adapter with technical documents, quotations and application review.
Honeywell MU-TLPA02 51309204-125 Low-Level Multiplexer Power Adapter Manuals,Datasheets,Link
Important Notice: Confirm the complete model, hardware revision and installed-system arrangement before use.
- Architecture boundary: MU-TLPA02 belongs to the LLMux chain with MU-PLAM02 and is not compatible with the separate RHMUX architecture.
- Two-FTA arrangement: One adapter connects two sixteen-channel LLMux FTAs, creating the documented thirty-two-point input assembly.
- Mixed sensor banks: The two connected FTAs may be the same type or a combination of RTD and thermocouple assemblies.
- Power allocation: The adapter contributes 360 mA to the 24 Vdc cabinet calculation before the remaining LLMux assemblies are added.
- RTD bank: MU-TAMR03 accepts resistance-temperature inputs for one sixteen-channel LLMux section.
- Local-reference thermocouples: MU-TAMT03 supports thermocouple inputs with its local cold-junction reference arrangement.
- Remote-reference thermocouples: MU-TAMT13 supports a remote CJR when the reference junction must be located away from the FTA.
- Flexible pairing: RTD and thermocouple banks can share the adapter, allowing one HPM LLMux point set to serve two temperature-measurement strategies.
- Approved card file: CE use depends on the compliant card-file configuration rather than the adapter material number alone.
- IOP connection: MU-KFTAxx serves the documented internal cable route, while MU-KFTSxx is used for the external IOP-to-FTA route.
- FTA distance: Honeywell documents an external adapter-to-FTA path up to 305 m when the specified cable family is used.
- CJR location: The remote-CJR thermocouple arrangement supports a reference-junction location up to 50 m from its FTA with the approved cabling.
- Mixed temperature units: Combine an RTD FTA and a thermocouple FTA on one HPM LLMux adapter for a thirty-two-point process-temperature station.
- Distributed thermocouple measurement: Use MU-TAMT13 when the cold-junction reference must be located remotely from the cabinet FTA.
- Dense RTD monitoring: Connect two MU-TAMR03 banks for multi-point vessel, reactor or heat-exchanger temperature acquisition.
- Long-distance temperature banks: Use the approved external LLMux cable path for remote sensor banks located away from the HPM cabinet.