Features:
- Occupies one unused physical I/O-module position in a Tricon CX chassis.
- Protects the vacant connector area while leaving the paired position independently serviceable.
- Provides a passive front cover with no power draw, channel assignment or configuration data.
The selected component covers one physical module location within a paired Tricon CX I/O arrangement.
It keeps the unused half-position closed while an approved module may remain installed in the neighboring half.
Match the opening width, paired-slot orientation and retaining points before installation to avoid obstructing adjacent hardware.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Triconex 8108X:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Closes one side of a paired I/O location when only a single module position is required.
- Protects a temporarily vacant module connector during planned maintenance or phased expansion.
- Helps technicians distinguish an approved single-position vacancy from a removed dual-position slot cover.
- Covering the vacant position helps preserve the intended airflow around neighboring I/O modules.
- The panel limits direct dust entry through the single-module opening in the chassis front.
- Environmental suitability remains governed by the complete installed chassis and cabinet rather than the passive blank alone.
- The narrow cover shields the unused backplane connector area from incidental contact.
- A closed opening reduces exposure of internal chassis surfaces during routine cabinet inspection.
- The panel contains no energized circuit and serves only as a mechanical protective component.
- The part is fitted to one physical I/O-module position, not to an entire logical slot.
- Position labels should be checked before mounting so the correct half of the I/O location is covered.
- A full-width 8109X panel is required when both physical positions of the logical slot are vacant.