Features:
- 25 MHz MC68LC040 processor
- 4MB parity-protected DRAM
- Ethernet interface without VMEbus
MVME162-014A represents the 25 MHz MC68LC040 configuration with 4MB parity-protected DRAM, Ethernet, four IndustryPack interfaces, and two serial ports.
The model is intended for embedded processing and networked I/O expansion where the controller operates without a VMEbus interface and without SCSI.
Check that the target system does not require VMEbus access or SCSI, and verify Ethernet, IndustryPack, serial, jumper, power, and cooling requirements before installation.
The Motorola VME MVME162-014A VME Embedded Controller may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Motorola VME MVME162-014A VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162-014A VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-014A
- ConditionNew Original ready stock
- Product FamilyMVME162 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- DRAM: 4MB parity-protected DRAM.
- SRAM: Battery-backed static RAM.
- Firmware storage: Flash memory for monitor/debugger firmware.
- NVRAM: Battery-backed NVRAM and time-of-day clock.
Network and modular I/O connections
- Network: Ethernet interface is provided; SCSI is not fitted.
- VMEbus: This configuration has no VMEbus interface.
- Serial I/O: Two serial ports.
- Expansion: Four IndustryPack interfaces.
Chassis and installation checks
- Compatibility: Verify VME chassis and backplane compatibility before insertion.
- Configuration: Confirm jumper and system-controller settings against the Motorola manual.
- Cooling: Maintain an operating range of 0°C to +70°C with forced-air cooling.
- Handling: Use antistatic precautions and remove chassis power before installation.